topic Re: iMX8M-Plus Supported Debugger for J-Tag in i.MX Processors

iMX8M-Plus Supported Debugger for J-Tag

Awindbiker — Tue, 12 Mar 2024 11:54:06 GMT

Please guide with some list of suitable debugger for iMX8M-Plus to use J-Tag. Currently I am having J-Link Segger Plus which is not working with the same.

Re: iMX8M-Plus Supported Debugger for J-Tag

Chavira — Tue, 12 Mar 2024 13:39:00 GMT

Hi @Awindbiker!

Thank you for contacting NXP Support!

The J link Segger Plus is compatible with iMX8MP.

Check this Application Note to see how to use the J Link Segger Plus on iMX8MP-EVK.

https://docs.nxp.com/bundle/AN14120/page/topics/introduction.html

Best Regards!

Chavira

Re: iMX8M-Plus Supported Debugger for J-Tag

Awindbiker — Thu, 14 Mar 2024 05:52:47 GMT

Thanks for your Comment and Suggestion. I tried the above method and getting below attached error:

1.) Error While using J-Link Segger Commander tool to detect the IMX8M:

Awindbiker_0-1710395024508.jpeg

2.) Error while using VS Code with J-Link Extension and SDK Downloaded:

Awindbiker_1-1710395181690.pngAwindbiker_2-1710395192340.png

Also, I copied J-Link Patch file at following location:

Awindbiker_3-1710395267461.pngAwindbiker_7-1710395551306.png

Below is the attached Schematic for our Custom Dev Board for J-Tag:

Awindbiker_5-1710395355725.pngAwindbiker_6-1710395365114.png