Unable to build IMX-TEST for IMX8MP Module

kanakshilledar — Mon, 11 Mar 2024 11:21:12 GMT

I am trying to build IMX-TEST for the Verdin iMX8M Plus SOM based on the iMX8MP SoC.

What PLATFORM name should I use for the Verdin SOM?

I have the 5.15 kernel source along with arm64 toolchain on Ubuntu 22.04

aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35)) 12.3.1 20230626

While building I am getting the following error.

$ make PLATFORM=IMX8MP LINUXPATH=/home/kanak/toradex/workdir/linux-toradex KBUILD_OUTPUT=/home/kanak/toradex/workdir/kbuild_output CROSS_COMPILE=/opt/toolchains/gcc-linaro/bin/aarch64-none-linux-gnu- MAKE test COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-audio-dsp.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-audio-pdm.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-audio-probe.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-audio.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-battery.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-bootcheck.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-busfreq-freq-check.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-busfreq.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-cpufreq-freq-check.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-cpufreq.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-cpuhotplug.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-cpuidle.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-cpuidle-sleeptime.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-devicetree.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-flash-read.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-gpio-keypad.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-iccdevfreq.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-ldo-bypass.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat_lowbus_run.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat_netpause.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-ocotp-nvmem.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-ocotp.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-pwm.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-rtc.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-suspend.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-tcrypt.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-thermal-read.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-thermal-trip.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-uart-probe.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat-uart.sh COPY /home/kanak/toradex/imx-test/platform/IMX8MP//BAT/bat_utils.sh STRIP /home/kanak/toradex/imx-test/platform/IMX8MP//ETM/etm /opt/toolchains/gcc-linaro/bin/aarch64-none-linux-gnu-strip: Unable to recognise the format of the input file `/home/kanak/toradex/imx-test/platform/IMX8MP//ETM/etm' make[1]: *** [Makefile:114: /home/kanak/toradex/imx-test/platform/IMX8MP//ETM/etm] Error 1 make: *** [Makefile:46: test] Error 2

Thanks!

Re: Unable to build IMX-TEST for IMX8MP Module

Chavira — Mon, 11 Mar 2024 14:50:22 GMT

Hi @kanakshilledar!

Thank you for contacting NXP Support!

I compile the imx-test without errors using the Yocto toolchain.

Try to use the Yocto toolchain.

If you don't have the Yocto toolchain, you can compile using the next command:

bitbake imx-image-full -c populate_sdk

install SDK:

tmp/deploy/sdk/xxx.sh

use SDK:

source /opt/fsl-imx-xwayland/xxx/environment-setup-aarch64-xxxx

Best Regards!

Chavira

Re: Unable to build IMX-TEST for IMX8MP Module

kanakshilledar — Mon, 11 Mar 2024 15:38:05 GMT

@Chavira
Thank you for your reply!
I am trying to build it outside of the yocto system.
So any way to get it working?

Best Regards

Re: Unable to build IMX-TEST for IMX8MP Module

Chavira — Mon, 11 Mar 2024 15:49:01 GMT

Hi @kanakshilledar!
Thank you for contacting NXP Support!

You only have to compile the toolchain for your target and then you can compile without Yocto using the toolchain generated by Yocto.

After that, you can compile in standalone all of our sources.

Re: Unable to build IMX-TEST for IMX8MP Module

kanakshilledar — Mon, 11 Mar 2024 18:55:13 GMT

Hi @Chavira !
I have built the yocto toolchain with the above steps. Could you please provide the PLATFORM variable for IMX8MP SoC. As I am targeting the Verdin iMX8M Plus SOM (https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus).
Thanks!

Re: Unable to build IMX-TEST for IMX8MP Module

Chavira — Tue, 12 Mar 2024 13:06:09 GMT

Hi @kanakshilledar!

You can use the imx8mpevk target for iMX8MP

i.MX ProcessorsのトピックRe: Unable to build IMX-TEST for IMX8MP Module

Unable to build IMX-TEST for IMX8MP Module

Re: Unable to build IMX-TEST for IMX8MP Module

Re: Unable to build IMX-TEST for IMX8MP Module

Re: Unable to build IMX-TEST for IMX8MP Module

Re: Unable to build IMX-TEST for IMX8MP Module

Re: Unable to build IMX-TEST for IMX8MP Module