https://community.nxp.com/t5/i-MX-Processors/i-mx8mp/m-p/1824491#M221002 <P>Hi,</P> <P>Thank you for your interest in NXP Semiconductor products,</P> <P>You can use a GPIO for USB_ID, the USB_ID pins have been changed for <A href="https://community.nxp.com/t5/i-MX-Processors/imx8mp-USB-ID-and-USB-boot-questions/m-p/1279136" target="_self">USB_DNU</A>.</P> <P>And refer to this guide for <A href="https://www.analog.com/en/resources/technical-articles/usb-onthego-otg-uses-and-support.html" target="_self">USB_ID or HNP</A> usage (Normal USB_ID usage).</P> <P>Regards</P> Sat, 09 Mar 2024 00:39:08 GMT JosephAtNXP 2024-03-09T00:39:08Z https://community.nxp.com/t5/i-MX-Processors/i-mx8mp/m-p/1823792#M220948 <P>你好，请问下：USB2.0 TYPE-C 怎么设计USB-OTG功能? 是不是一定要用到USB_ID引脚做判断(拉高是做Device功能，拉低是做HOST功能)？<BR />EVK硬件参考设计是USB3.0 的TYPE-C 做OTG功能(不便于做参考设计，且没有用到USB_ID引脚)</P> Fri, 08 Mar 2024 03:31:05 GMT https://community.nxp.com/t5/i-MX-Processors/i-mx8mp/m-p/1823792#M220948 JasonShu 2024-03-08T03:31:05Z https://community.nxp.com/t5/i-MX-Processors/i-mx8mp/m-p/1824491#M221002 <P>Hi,</P> <P>Thank you for your interest in NXP Semiconductor products,</P> <P>You can use a GPIO for USB_ID, the USB_ID pins have been changed for <A href="https://community.nxp.com/t5/i-MX-Processors/imx8mp-USB-ID-and-USB-boot-questions/m-p/1279136" target="_self">USB_DNU</A>.</P> <P>And refer to this guide for <A href="https://www.analog.com/en/resources/technical-articles/usb-onthego-otg-uses-and-support.html" target="_self">USB_ID or HNP</A> usage (Normal USB_ID usage).</P> <P>Regards</P> Sat, 09 Mar 2024 00:39:08 GMT https://community.nxp.com/t5/i-MX-Processors/i-mx8mp/m-p/1824491#M221002 JosephAtNXP 2024-03-09T00:39:08Z