MFGtool: UCL.xml for mx53 WinCE

yen — Tue, 05 Feb 2013 03:48:07 GMT

Hi,

I am trying to edit the UCL.xml to be able to flash the NOR via the MFGtool

Previously, we are using the ATK tool. Basically, I just want to be able to delete and program just like in ATK.

We are using mx53 ARD. I want to flash NOR spansion and numonyx.

Appreciate it if you can give any feedback on my xml file below.

Thanks a lot!

Here is my UCL.xml.
<UCL>
<CFG>
    <STATE name="BootStrap" dev="MX53" />
    <DEV name="MX53" vid="15A2" pid="004E"/>
    <STATE name="Updater" dev="Updater" />
    <DEV name="Updater" vid="066F" pid="37FF" />
</CFG>

<LIST name="NOR (all)" desc="Write files to NORflash">
<CMD type="find" body="BootStrap" timeout="60"/>
        <CMD type="boot" body="BootStrap" file ="eboot_uut.nb0" >Running plugin to init DDR Memory.</CMD>
        <CMD type="load" file="uce.nb0" address="0x70200000" loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Doing preLoad."</CMD>
        <CMD type="jump" > Jumping to OS image. </CMD>
        <CMD type="find" body="Updater" timeout="180"/>

        <CMD type="push" body="MediaType:SPINOR">Send media type.</CMD>
<CMD type="push" body="wrd:0xF0000000">Write Bootstrap.</CMD>
        <CMD type="push" body="send" file="files/Bootstrap.nbx">Sending a file.</CMD>
        <CMD type="push" body="save">Finish sending data.</CMD>
        <CMD type="push" body="wrd:0xF0240000">Write Bootloader1.</CMD>
        <CMD type="push" body="send" file="files/Bootloader1.fli">Sending a file.</CMD>
        <CMD type="push" body="save">Finish sending data.</CMD>
        <CMD type="push" body="wrd:0xF00C0000">Write Bootloader2.</CMD>
        <CMD type="push" body="send" file="files/Bootloader2.fli">Sending a file.</CMD>
        <CMD type="push" body="save">Finish sending data.</CMD>
        <CMD type="push" body="wrd:0xF0DC0000">Write EBOOTNOR.</CMD>
        <CMD type="push" body="send" file="files/EBOOTNOR.fli">Sending a file.</CMD>
        <CMD type="push" body="save">Finish sending data.</CMD>
        <CMD type="push" body="wrd:0xF0060000">Write HWInfo.</CMD>
        <CMD type="push" body="send" file="files/HWInfo.fli">Sending a file.</CMD>
        <CMD type="push" body="save">Finish sending data.</CMD>
        <CMD type="push" body="Update Complete!">Done</CMD>
</LIST>
</UCL>

topic MFGtool: UCL.xml for mx53 WinCE in i.MX Processors

MFGtool: UCL.xml for mx53 WinCE