i.MX ProcessorsのトピックLoad software image to i.MX50 NAND FLASH https://community.nxp.com/t5/i-MX-Processors/Load-software-image-to-i-MX50-NAND-FLASH/m-p/246550#M21509 <HTML><HEAD></HEAD><BODY><P>Dear all:</P><P></P><P>How to load software image to i.MX50 NAND FLASH?</P><P>How to switch the on-board DIP?</P><P>Best Regard</P><P>Steven Wu</P></BODY></HTML> Mon, 04 Feb 2013 11:13:44 GMT stevenwoo 2013-02-04T11:13:44Z Load software image to i.MX50 NAND FLASH https://community.nxp.com/t5/i-MX-Processors/Load-software-image-to-i-MX50-NAND-FLASH/m-p/246550#M21509 <HTML><HEAD></HEAD><BODY><P>Dear all:</P><P></P><P>How to load software image to i.MX50 NAND FLASH?</P><P>How to switch the on-board DIP?</P><P>Best Regard</P><P>Steven Wu</P></BODY></HTML> Mon, 04 Feb 2013 11:13:44 GMT https://community.nxp.com/t5/i-MX-Processors/Load-software-image-to-i-MX50-NAND-FLASH/m-p/246550#M21509 stevenwoo 2013-02-04T11:13:44Z Re: Load software image to i.MX50 NAND FLASH https://community.nxp.com/t5/i-MX-Processors/Load-software-image-to-i-MX50-NAND-FLASH/m-p/246551#M21510 <HTML><HEAD></HEAD><BODY><P>&nbsp;&nbsp;&nbsp; Attached is the document for how to support NAND boot on iMX50, note, the default iMX50 EVK board doesn't support NAND boot, hardware rework was needed.</P></BODY></HTML> Tue, 05 Feb 2013 08:21:11 GMT https://community.nxp.com/t5/i-MX-Processors/Load-software-image-to-i-MX50-NAND-FLASH/m-p/246551#M21510 qiang_li-mpu_se 2013-02-05T08:21:11Z