i.MX ProcessorsのトピックError comes while debugging

i.MX ProcessorsのトピックError comes while debugging https://community.nxp.com/t5/i-MX-Processors/Error-comes-while-debugging/m-p/1748081#M214852 <P>I'm, using rt1170 board with mcuexpresso, and im getting these erroes while i'm debbugging, please help and tell how to ovecome this?</P><P> </P><P> </P><DIV><DIV><P>MCUXpresso IDE RedlinkMulti Driver v11.8 (Jul 12 2023 16:09:15 - crt_emu_cm_redlink build 2)</P><P>Found chip XML file in C:/nxp/SLEEP_WAKEUP_WORKSPACE/SLEEP_WAKEUP_EVK/Debug\MIMXRT1176xxxxx.xml</P><P><SPAN>( 5) Remote configuration complete</SPAN></P><P>Reconnected to existing LinkServer process.</P><P><SPAN>============= SCRIPT: RT1170_connect_M7_wake_M4.scp =============</SPAN></P><P><SPAN>RT1170 Connect M7 and Wake M4 Script</SPAN></P><P><SPAN>DpID = 6BA02477</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Setting M4 spin code</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Setting M4 clock</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Resetting M4 core</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>View cores on the DAP AP</SPAN></P><P><SPAN>DpID = 6BA02477</SPAN></P><P><SPAN>TAP 0: 6BA02477 Core 1: M4 APID: 24770011 ROM Table: E00FF003</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>============= END SCRIPT ========================================</SPAN></P><P>Probe Firmware: MCU-LINK r0FF CMSIS-DAP V0.078 (NXP Semiconductors)</P><P>Serial Number: E4AO4L4PRLOU1</P><P>VID:PID: 1FC9:0143</P><P>USB Path: \\?\hid#vid_1fc9&pid_0143&mi_00#7&1d2ef268&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>connection failed - Nn(05). Wire ACK Fault in DAP access.. Retrying</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P><SPAN>Failed on connect: Nn(05). Wire ACK Fault in DAP access</SPAN></P><P><SPAN>Connected&Reset. Was: NotConnected. DpID: 6BA02477. CpuID: 00000000. Info: <None></SPAN></P><P>Last stub error 0: OK</P><P>Last sticky error: 0x0 AIndex: 0</P><P>Debug bus selected: MemAp 0</P><P>DAP Speed test unexecuted or failed</P><P>Debug protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</P><P><SPAN>(100) Target Connection Failed</SPAN></P><P>error closing down debug session - Nn(05). Wire ACK Fault in DAP access</P><P> </P></DIV></DIV><P> </P> Sat, 28 Oct 2023 07:07:17 GMT sajithdevidas 2023-10-28T07:07:17Z Error comes while debugging https://community.nxp.com/t5/i-MX-Processors/Error-comes-while-debugging/m-p/1748081#M214852 <P>I'm, using rt1170 board with mcuexpresso, and im getting these erroes while i'm debbugging, please help and tell how to ovecome this?</P><P> </P><P> </P><DIV><DIV><P>MCUXpresso IDE RedlinkMulti Driver v11.8 (Jul 12 2023 16:09:15 - crt_emu_cm_redlink build 2)</P><P>Found chip XML file in C:/nxp/SLEEP_WAKEUP_WORKSPACE/SLEEP_WAKEUP_EVK/Debug\MIMXRT1176xxxxx.xml</P><P><SPAN>( 5) Remote configuration complete</SPAN></P><P>Reconnected to existing LinkServer process.</P><P><SPAN>============= SCRIPT: RT1170_connect_M7_wake_M4.scp =============</SPAN></P><P><SPAN>RT1170 Connect M7 and Wake M4 Script</SPAN></P><P><SPAN>DpID = 6BA02477</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Setting M4 spin code</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Setting M4 clock</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Resetting M4 core</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>View cores on the DAP AP</SPAN></P><P><SPAN>DpID = 6BA02477</SPAN></P><P><SPAN>TAP 0: 6BA02477 Core 1: M4 APID: 24770011 ROM Table: E00FF003</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>Error: Wire Ack Fault - target connected?</SPAN></P><P><SPAN>============= END SCRIPT ========================================</SPAN></P><P>Probe Firmware: MCU-LINK r0FF CMSIS-DAP V0.078 (NXP Semiconductors)</P><P>Serial Number: E4AO4L4PRLOU1</P><P>VID:PID: 1FC9:0143</P><P>USB Path: \\?\hid#vid_1fc9&pid_0143&mi_00#7&1d2ef268&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>connection failed - Nn(05). Wire ACK Fault in DAP access.. Retrying</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P>Using memory from core 0 after searching for a good core</P><P><SPAN>Failed on connect: Nn(05). Wire ACK Fault in DAP access</SPAN></P><P><SPAN>Connected&Reset. Was: NotConnected. DpID: 6BA02477. CpuID: 00000000. Info: <None></SPAN></P><P>Last stub error 0: OK</P><P>Last sticky error: 0x0 AIndex: 0</P><P>Debug bus selected: MemAp 0</P><P>DAP Speed test unexecuted or failed</P><P>Debug protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</P><P><SPAN>(100) Target Connection Failed</SPAN></P><P>error closing down debug session - Nn(05). Wire ACK Fault in DAP access</P><P> </P></DIV></DIV><P> </P> Sat, 28 Oct 2023 07:07:17 GMT https://community.nxp.com/t5/i-MX-Processors/Error-comes-while-debugging/m-p/1748081#M214852 sajithdevidas 2023-10-28T07:07:17Z Re: Error comes while debugging https://community.nxp.com/t5/i-MX-Processors/Error-comes-while-debugging/m-p/1749941#M215020 <P>Hello <a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/222022">@sajithdevidas</a> </P> <P>Do you use DEMO board? If yes, please refer to start guide to download and debug:</P> <P><A href="https://www.nxp.com/document/guide/getting-started-with-the-i-mx-rt1170-evaluation-kit:GS-MIMXRT1170-EVK?section=plug-it-in" target="_blank">https://www.nxp.com/document/guide/getting-started-with-the-i-mx-rt1170-evaluation-kit:GS-MIMXRT1170-EVK?section=plug-it-in</A> </P> <P>Also pay attention jumpers on board, recommend use a simple SDK demo first to test.</P> <P> </P> <P>BR</P> <P>Alice</P> Wed, 01 Nov 2023 03:13:41 GMT https://community.nxp.com/t5/i-MX-Processors/Error-comes-while-debugging/m-p/1749941#M215020 Alice_Yang 2023-11-01T03:13:41Z