topic Re: RT1011 cannot restart by software in i.MX Processors

RT1011 cannot restart by software

VectorH — Thu, 26 Oct 2023 05:59:55 GMT

Hello all,

I cannot restart RT1011 by software, but the restart function works fine in RT1021/RT1052/RT1062/RT1176.

J-Link Error when I run to "NVIC_SystemReset();".

What's wrong with my restart function?

Re: RT1011 cannot restart by software

Pavel_Hernandez — Thu, 26 Oct 2023 23:43:03 GMT

Hello, my name is Pavel, and I will be supporting your case, I found this thread that maybe could help you.

NVIC_SystemReset() is not working with MiMxRT1020 - NXP Community

Best regards,
Pavel

Re: RT1011 cannot restart by software

VectorH — Fri, 27 Oct 2023 00:13:43 GMT

Hi Pavel, changed the FlexRam was the cause of the problem.

I changed the FlexRam to 96K Itcm and 32K Dtcm size in "Startup.s" file, the code crash when software reset. My code was copy from flash and run in Itcm, it was more than 64k size. If change FlexRam to default value, the code crash, too. I see the problem but no idea to fix it now.

Thank you for reading, have any questions, please contact at first.

Re: RT1011 cannot restart by software

Pavel_Hernandez — Tue, 31 Oct 2023 23:42:20 GMT

Hello, sorry for the late response, you need to modify another register to use the Flex RAM please check the link below maybe can help you.

Reallocating the FlexRAM - NXP Community

Best regards,
Pavel

Re: RT1011 cannot restart by software

Alex_Tsai — Thu, 11 Apr 2024 09:17:41 GMT

@VectorH

Try to use the FLEXRAM_SetAllocateRamSrc() funciton before the system reset, and reset it using the settings in efuse.

Refer to the following

FLEXRAM_SetAllocateRamSrc(kFLEXRAM_BankAllocateThroughHardwareFuse);
NVIC_SystemReset();