https://community.nxp.com/t5/i-MX-Processors/USB-OTG-debug-cable-driver-failed-imx8mq-evk-board/m-p/1369840#M214332 <P>When the board is powered on, the USB will be detected.</P> Thu, 11 Nov 2021 09:32:05 GMT DeahyunKim 2021-11-11T09:32:05Z https://community.nxp.com/t5/i-MX-Processors/USB-OTG-debug-cable-driver-failed-imx8mq-evk-board/m-p/1365491#M214331 <P>i just got a new IMX8MQ evk board and i wanted to flash the linxu via usb debug table. however, the os device mangager couldn't recognize the cable(debug USB pin) even i installed the VCP driver. could you raise your ideas? thanks .</P> Tue, 17 Oct 2023 22:27:47 GMT https://community.nxp.com/t5/i-MX-Processors/USB-OTG-debug-cable-driver-failed-imx8mq-evk-board/m-p/1365491#M214331 octmejun123 2023-10-17T22:27:47Z https://community.nxp.com/t5/i-MX-Processors/USB-OTG-debug-cable-driver-failed-imx8mq-evk-board/m-p/1369840#M214332 <P>When the board is powered on, the USB will be detected.</P> Thu, 11 Nov 2021 09:32:05 GMT https://community.nxp.com/t5/i-MX-Processors/USB-OTG-debug-cable-driver-failed-imx8mq-evk-board/m-p/1369840#M214332 DeahyunKim 2021-11-11T09:32:05Z