topic Re: LTIB i.MX51 Platforms doesn't appear in ltib configuration ? in i.MX Processors

LTIB i.MX51 Platforms doesn't appear in ltib configuration ?

G_rio — Fri, 20 May 2011 14:28:49 GMT

Could anyone help me with this issue ?

Thank you

Re: LTIB i.MX51 Platforms doesn't appear in ltib configuration ?

LuisCasado — Fri, 20 May 2011 15:01:56 GMT

Hello,

Select that option, Freescale i.Mx reference boards and Exit

Then, in the next screen configuration Select imx5x and the profile you want (Min, Gnome,...) And Exit

In the next screen configuration select your board: mx51_bbg in your case, exit and build the image.

Best Regards,

Re: LTIB i.MX51 Platforms doesn't appear in ltib configuration ?

G_rio — Fri, 20 May 2011 17:51:59 GMT

I run LTIB after set permission on folder and i run this cmd

./ltib --preconfig config/platform/imx/imx51.cf --batch --dlonly --noredir

Luis Casado said:

Hello,

Select that option, Freescale i.Mx reference boards and Exit

Then, in the next screen configuration Select imx5x and the profile you want (Min, Gnome,...) And Exit

In the next screen configuration select your board: mx51_bbg in your case, exit and build the image.

Best Regards,

Re: LTIB i.MX51 Platforms doesn't appear in ltib configuration ?

LuisCasado — Fri, 20 May 2011 18:09:24 GMT

Hello,

After installing the BSP. Just run ./ltib and you will get the configuration screens. You can use ./ltib --selectype and make configuration across screens.

Best Regards,

Re: LTIB i.MX51 Platforms doesn't appear in ltib configuration ?

G_rio — Tue, 05 Jul 2011 18:05:10 GMT

This error was solved reinstalling ltib.