IMX6Q Device tree for RGMII MAC to MAC interface

ashton_ng — Wed, 27 Sep 2023 01:07:47 GMT

Hi,

I have a board which is connected IMX6Q processor to a FPGA and one of the interfaces is RGMII and it is using MAC to MAC interface.

I have defined the device tree as follow:

....

pinctrl_enet: enetgrp {

fsl,pins = <

MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030

MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030

MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030

MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030

MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030

MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030

MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030

MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030

MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030

MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030

MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030

MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030

};

....

&fec {

pinctrl-names = "default";

pinctrl-0 = <&pinctrl_enet>;

phy-mode = "rgmii";

status = "okay";

fixed-link {

max-speed = <1000>;

full-duplex;

};

When the board boot up, there is an error:

fec 2188000.ethernet: broken fixed-link specification

fec: probe of 2188000.ethernet failed with error -22

I am not so familiar with device tree and I am trying to copy the example from other boards.

Need help in figuring out the solution.

Thanks.

Re: IMX6Q Device tree for RGMII MAC to MAC interface

JosephAtNXP — Wed, 27 Sep 2023 14:22:07 GMT

Hi,

Thank you for your interest in NXP Semiconductor products,

You can have a reference for your device tree's in this folder, particularly I'm pointing to what appears to be the issue here.

max-speed should be changed to speed.

We are looking at u-boot's device tree, right? Let me know if the issue persists.

Regards