mounting usbfs on /proc/bus/usb failed

小川崇 — Thu, 08 Aug 2013 05:42:43 GMT

Greetings,

I have a problem when I boot my i.MX53 ARD board from SD card.

The error occurs when udev is trying to mount usbfs as shown below.

Mounting /proc and /sys

Starting the hotplug events dispatcher udevd

Synthesizing initial hotplug events

Setting the hostname to freescale

Mounting filesystems

mount: mounting usbfs on /proc/bus/usb failed: No such file or directory

Starting inetd:

starting pid 2117, tty '': '/sbin/getty -L ttymxc0 115200 vt100'

I want to fix this error.
but I don't know how to fix this problem.
I appreciate if someone can help me to solve it

Regards,

takashi.

Original Attachment has been moved to: boot.log.zip

Re: mounting usbfs on /proc/bus/usb failed

txbest — Wed, 25 Sep 2013 07:54:30 GMT

Are you sure that is a problem?The log that you given above saids usbfs not mount Ok!

Did you connect your board to PC via USB_otg?and of cource you have to config your PC and your board ,they must be in the same IP area!

If you can login your linux system , that is to say ,it is not a problem.