topic Re: i.MX7D JTAG_MOD in i.MX Processors

i.MX7D JTAG_MOD

HOTA — Tue, 12 Sep 2023 11:28:52 GMT

Hi,

For the i.MX7D's JTAG_MOD, which should be set for the Pull select Field: 100K PU or 100K PD? The datasheet indicates that the default value is 100K PU, but in the config tool, the default value is set to 100K PD. This discrepancy is causing some confusion.

・datasheet

・configtool

Thanks,
HOTA

Re: i.MX7D JTAG_MOD

riteshmpatel — Wed, 13 Sep 2023 05:27:59 GMT

Hi @HOTA,

I hope you are doing well.

Apologies for the inconvenience caused.

The Pull Select Field shall be 100K PD. Please refer to the community link given below:

https://community.nxp.com/t5/i-MX-Processors/iMX-7D-JTAG-MOD-default-pulling/td-p/673387

I hope it helps!

Thanks & Regards,
Ritesh M Patel

Re: i.MX7D JTAG_MOD

HOTA — Wed, 13 Sep 2023 05:51:19 GMT

Hi @riteshmpatel ,

Thank you for your response.

I apologize for the inconvenience caused as I couldn't find the past articles.

Thank you again!

HOTA