topic Re: Open OCD Configuration for IMX8DXLEVK in i.MX Processors

Open OCD Configuration for IMX8DXLEVK

chanks — Fri, 01 Sep 2023 15:36:46 GMT

The BCU documentation mentions that the imx8dxl can be debugged using OpenOCD. However, in looking at the Open OCD repository, I can't find the appropriate config files for the IMX8DXL. Do these files exist somewhere? All I can see are the files for the IMX8M and the evaluation board for the IMX8M.

Re: Open OCD Configuration for IMX8DXLEVK

hector_delgado — Fri, 01 Sep 2023 18:56:24 GMT

Hi @chanks ,

I hope you're doing great! I'm currently reviewing and double checking this information since there may be some inconsistencies with the support of OpenOCD for i.MX devices. I'll let you know as soon as I get more information from our team. Thank you!

Best regards,
Hector.

Re: Open OCD Configuration for IMX8DXLEVK

hector_delgado — Tue, 05 Sep 2023 16:29:49 GMT

Hi @chanks ,

I hope you're doing well. Here are the configuration files for the IMX8DXL EVK. Let me know if this was of any help.

Best regards,
Hector.

Re: Open OCD Configuration for IMX8DXLEVK

chanks — Tue, 05 Sep 2023 17:19:18 GMT

It looks like this is two of the three needed files. I'm still missing the imx8dxl-evk.cfg file that should go in the ftdi directory.

I think I have the second config file in this command, but not the first config file:

openocd -f tcl/interface/ftdi/imx8dxl-evk.cfg -f tcl/board/imx8dxl-evk.cfg

Re: Open OCD Configuration for IMX8DXLEVK

hector_delgado — Wed, 06 Sep 2023 18:42:35 GMT

Hi @chanks ,

Let me double check this. Thank you.

Best regards,
Hector.

Re: Open OCD Configuration for IMX8DXLEVK

hector_delgado — Fri, 08 Sep 2023 17:03:07 GMT

Hi @chanks ,

Here's the missing file, sorry for any inconvenience this may have caused. Thank you.

Best regards,
Hector.

Re: Open OCD Configuration for IMX8DXLEVK

chanks — Fri, 08 Sep 2023 18:33:24 GMT

Thanks so much! With this file and the file above I can make a connection.