topic Android JB4.2.2_1.0.0 issue: MFG Firmware build does not compile in i.MX Processors

Android JB4.2.2_1.0.0 issue: MFG Firmware build does not compile

ujalakumar — Fri, 17 May 2013 17:55:16 GMT

Hi All,

Seems that the Android JB4.2.2 release has got some unresolved issues in manufacturing firmware build.. I am trying to generate "uImage" for the manufcaturing firmware using "imx6_updater_defconfig" . But even with the default board files included in the package, the compilation is not getting through and the below error is reported...

drivers/built-in.o: In function `mxc_hdmi_remove':

clkdev.c:(.text+0x1078c): undefined reference to `switch_dev_unregister'

clkdev.c:(.text+0x10798): undefined reference to `switch_dev_unregister'

drivers/built-in.o: In function `hotplug_worker':

clkdev.c:(.text+0x12608): undefined reference to `switch_set_state'

clkdev.c:(.text+0x12618): undefined reference to `switch_set_state'

clkdev.c:(.text+0x12818): undefined reference to `switch_set_state'

clkdev.c:(.text+0x12828): undefined reference to `switch_set_state'

drivers/built-in.o: In function `mxc_hdmi_probe':

clkdev.c:(.devinit.text+0x3c8): undefined reference to `switch_dev_register'

clkdev.c:(.devinit.text+0x3d4): undefined reference to `switch_dev_register'

make: *** [.tmp_vmlinux1] Error 1

Has anyone also experience the same or worked on its fix.. !!

We are working on a custom board based on "SABRE-SDB" and need to generte the MFG uImage for our custom board to be used with the MFG tool. Any help and guidance in this regard will be deeply appreciated and eagerly awaited.. attached here is the complete build log of the MFG firmware for the reference

warm regards

Ujala

Original Attachment has been moved to: mfgBuild_err_complete.txt.zip

Re: Android JB4.2.2_1.0.0 issue: MFG Firmware build does not compile

timjaacks — Mon, 24 Jun 2013 16:05:49 GMT

Hi Ujala,

you have to enable CONFIG_SWITCH in your kernel configuration.

Regards,

Tim

Re: Android JB4.2.2_1.0.0 issue: MFG Firmware build does not compile

ujalakumar — Wed, 26 Jun 2013 16:12:44 GMT

Hi Tim,

Many thanks for the revert and correct guidance. I had already solved it by exactly enabling the same switch in the kernel config I mean "CONFIG_SWITCH".. so I am able to build the mfg firmware and proceed further. I have downloaded the image files into the board using mfg tool . However, the booting is not going beyond Kernel loading..!! I mean , it loads the entire kernel perfectly but simply stops after the last step of kernel loading and does not load Android at all...!! I have tried my best but still unable to solve this issue.. request your help in this regard...

pl. find attached here the log of the same for reference..

regards,

Ujala