topic Remote desktop on iMX93EVK in i.MX Processors

Remote desktop on iMX93EVK

MaxSaka — Thu, 03 Aug 2023 02:31:40 GMT

Hello,

Does the iMX93 support running a headless Wayland remote desktop through freeRDP or any other means, if so, what is the recommendation.

Thank you.

Re: Remote desktop on iMX93EVK

Rita_Wang — Thu, 03 Aug 2023 04:06:08 GMT

Could you tell us which version BSP are you using, then I will help confirm.

Wish you have a nice day

Re: Remote desktop on iMX93EVK

MaxSaka — Thu, 03 Aug 2023 04:21:43 GMT

Hello,
I am using the i.MX Linux Yocto Project BSP 6.1.1_1.0.0 Release and building the "imx-image-multimedia" image.
freeRDP was added to the build however I'm running into this error while booting:
[FAILED] Failed to start Weston, a …mpositor, as a system service.

To be clear, this error is generated with or without my changes.

Please let me know if I need to provide any additional information.

Thank you.

Regards

Re: Remote desktop on iMX93EVK

Rita_Wang — Thu, 03 Aug 2023 04:30:51 GMT

Could you share us your full boot log file to us?

Re: Remote desktop on iMX93EVK

MaxSaka — Thu, 03 Aug 2023 04:37:13 GMT

Please see attached boot log.

Thank you.

Re: Remote desktop on iMX93EVK

Rita_Wang — Fri, 04 Aug 2023 09:38:21 GMT

can you try our newest released bsp to see if this problem is still or not. I see that your board is boot up well, and I am not sure if it related to the hardware in your hand, I will go to office to test it on our EVK board next week

Re: Remote desktop on iMX93EVK

MaxSaka — Fri, 04 Aug 2023 15:34:51 GMT

I will try the latest BSP and let you know how it works out.
Thank you for taking the time to validate on your end and I'm looking forward to hearing back.

Regards.

Re: Remote desktop on iMX93EVK

MaxSaka — Tue, 08 Aug 2023 05:11:49 GMT

Hi,

I didn't get a chance to try the new BSP however, I did remove X11 from the Yocto build and was able to run the remote desktop. I will try the new BSP and report back when I get a chance.

Regards.

Re: Remote desktop on iMX93EVK

MaxSaka — Mon, 28 Aug 2023 03:23:58 GMT

Hello again,

I finally got the chance to upgrade to the 6.1.22_2.0.0 release and ran into the same issue where the freeRDP remote desktop does not work when including X11 and does work once X11 is removed. X11 is needed for a variety of demos however we also would like to use the remote desktop feature.

Would it be possible for someone on your end to try adding the remote desktop and report back. This is an important feature that we can't do without and would like to find a solution.

Thank you for your support.

Regards.