topic Re: bitbake error - openssl & glibc exit code '1' in i.MX Processors

bitbake error - openssl & glibc exit code '1'

B_Prabhu — Wed, 14 Jun 2023 05:02:04 GMT

Hello,

I building an image hardknott and below version

repo init -u https://github.com/nxp-imx/imx-manifest  -b imx-linux-hardknott -m imx-5.10.72-2.2.3.xml

while doing i am getting below error repeatedly,

ERROR: openssl-native-1.1.1l-r0 do_compile: oe_runmake failed
ERROR: openssl-native-1.1.1l-r0 do_compile: Execution of '/home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/x86_64-linux/openssl-native/1.1.1l-r0/temp/run.do_compile.1297296' failed with exit code 1
ERROR: Logfile of failure stored in: /home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/x86_64-linux/openssl-native/1.1.1l-r0/temp/log.do_compile.1297296

ERROR: glibc-2.33-r0 do_compile: oe_runmake failed
ERROR: glibc-2.33-r0 do_compile: Execution of '/home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/glibc/2.33-r0/temp/run.do_compile.1297295' failed with exit code 1
ERROR: Logfile of failure stored in: /home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/cortexa9t2hf-neon-poky-linux-gnueabi/glibc/2.33-r0/temp/log.do_compile.1297295

i tried below commands

"bitbake -c cleanall"

bitbake -c fetch

bitbake core-image-minimal

even though there is no improvement same error i am getting. can you pls support?

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Wed, 14 Jun 2023 06:53:55 GMT

what's your ubuntu version? did you install all of packages according to the yocto user guide?

Re: bitbake error - openssl & glibc exit code '1'

B_Prabhu — Wed, 14 Jun 2023 07:02:25 GMT

My Ubuntu version is 20.04 and i followed below link procedure for installing the required package for build process.

Yocto Project Quick Build — The Yocto Project ® 4.2.999 documentation

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Wed, 14 Jun 2023 08:27:47 GMT

did you install the packages in the yocto user guide? Pls refer to the chapter 3.2 Host packages of enclosed file

Re: bitbake error - openssl & glibc exit code '1'

B_Prabhu — Wed, 14 Jun 2023 09:10:38 GMT

I have installed package which you given in the document. but still the same error, it is not resolved..

ERROR: openssl-native-1.1.1l-r0 do_compile: oe_runmake failed
ERROR: openssl-native-1.1.1l-r0 do_compile: Execution of '/home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/x86_64-linux/openssl-native/1.1.1l-r0/temp/run.do_compile.190450' failed with exit code 1
ERROR: Logfile of failure stored in: /home/user1/imx6dlsabreauto/bld-xwayland/tmp/work/x86_64-linux/openssl-native/1.1.1l-r0/temp/log.do_compile.190450

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Thu, 15 Jun 2023 08:21:36 GMT

if you don't install these packages before, you need clean the environment and build again, otherwise you still get the errors

before you building, install two parts

1) Essential Yocto Project host packages in the yocto user guide

2) install the packages according to the chapter 1.4 Required Packages for the Build Host

"https://docs.yoctoproject.org/ref-manual/system-requirements.html?highlight=ubuntu"

Re: bitbake error - openssl & glibc exit code '1'

B_Prabhu — Thu, 15 Jun 2023 08:28:06 GMT

Hello,

I have ensured both packages are installed and i rebuild the same but error remain the same. this i tried yesterday itself.

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Thu, 15 Jun 2023 08:31:47 GMT

before you installed the packages, did you clean all of building folders, then build the ycoto from the begging?

Re: bitbake error - openssl & glibc exit code '1'

B_Prabhu — Thu, 15 Jun 2023 08:35:22 GMT

yes i have cleaned everything and build the new one. still error is there.

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Thu, 15 Jun 2023 08:40:42 GMT

give me detailed build steps, let me reproduce this

Re: bitbake error - openssl & glibc exit code '1'

B_Prabhu — Thu, 15 Jun 2023 08:52:06 GMT

Here i have explained about the step by step procedure how i have done:

1. Installed packages given in the link and document (attached : chapter 3.2 Host packages)

"https://docs.yoctoproject.org/ref-manual/system-requirements.html?highlight=ubuntu"

2. Followed as per below

$: mkdir ~/bin
$: curl http://commondatastorage.googleapis.com/git-repo-downloads/repo  > ~/bin/repo
$: chmod a+x ~/bin/repo
$: PATH=${PATH}:~/bin

3. Followed as per below

$: mkdir <release>
$: cd <release>
$:repo init -u https://github.com/nxp-imx/imx-manifest -b imx-linux-hardknott -m imx-5.10.72-2.2.3.xml
$: repo sync

4. Followed as per below

MACHINE=imx6dlsabreauto DISTRO=fsl-imx-xwayland source ./imx-setup-release.sh -b bld-xwayland

5. Followed as per below

bitbake imx-image-core

Re: bitbake error - openssl & glibc exit code '1'

joanxie — Wed, 21 Jun 2023 06:54:25 GMT

I did the same steps as yours, my building is successful, you still need check your ubuntu environment