sensor SC1330T porting on imx8mp

wangbaoC — Fri, 16 Jun 2023 07:34:36 GMT

Dear NXP Team,

We want to port the sensor SC1330T on imx8mp, we modified the sensor driver in ov5645, then use cmd

"gst-launch-1.0 v4l2src device=/dev/video0 ! autovideosink" , we could get image on the screen(hdmi), but the image is not full of it . check it below

Could you pls help us to check it?

Thanks a lot

Re: sensor SC1330T porting on imx8mp

Sanket_Parekh — Mon, 19 Jun 2023 10:34:18 GMT

Hi @wangbaoC

I hope you are doing well

Are you using both CSI ports simultaneously?

Please share which modification you have done in the sensor driver for ov5645.

To debug the issue,

One can check the display resolution according to section 1.4.2.12 Display Interfaces from the Reference manual IMX8MPRM.

Kindly verify the parameter for MIPI Interface according to Table 1. Features from the datasheet IMX8MPIEC.

For the information related to the GStreamer pipeline, please refer to the below document.

i.MX 8 GStreamer User Guide

Thanks & Regards

Sanket Parekh

topic sensor SC1330T porting on imx8mp in i.MX Processors

sensor SC1330T porting on imx8mp

Re: sensor SC1330T porting on imx8mp