systemd vendor preset disabled

Shay1 — Mon, 12 Jun 2023 14:50:25 GMT

I added my application to the yocto image as a service.

All is fine, but after loading the image to the SOM, on the initial startup, service is disabled.

systemctl status <app_name> gives the following error:
Loaded: loaded (/etc/systemd/system/<app_name>.service; disabled; vendor preset: disabled)

Active: inactive (dead)

using systemctl enable <app_name> enables the service and from that point on, the service loads automatically on startup.

How do I bypass this vendor limitation and allow for the service to be enabled by default ?

I already tried adding to my bb file SYSTEMD_AUTO_ENABLE = "enable"

but the issue persists.

I'm using Yocto Kirkstone on VAR-SOM-MX8M-PLUS

Thanks,
Shay

Re: systemd vendor preset disabled

Chavira — Tue, 13 Jun 2023 13:02:37 GMT

Hi @Shay1

Thank you for contacting NXP Support!

To provide a better solution please contact variscite support because we don't provide the software to that board.

Best Regards

Chavira

i.MX Processors中的主题 Re: systemd vendor preset disabled

systemd vendor preset disabled

Re: systemd vendor preset disabled