topic Re: i.MX8MP USB Configuration for Serial Download Mode in i.MX Processors

i.MX8MP USB Configuration for Serial Download Mode

Wobaffet — Fri, 26 May 2023 07:55:00 GMT

Hello,

We are working on our prototype board, we pulled the Boot Mode 0 pin to high so MPU should be in Serial Download mode. For the prototype board USB, we only connected power, ground and data +/- . Is this configuration should work or we are missing out on something else?

Thank you in advance!

Re: i.MX8MP USB Configuration for Serial Download Mode

Wobaffet — Mon, 29 May 2023 05:42:35 GMT

Reminder.

Re: i.MX8MP USB Configuration for Serial Download Mode

riteshmpatel — Mon, 29 May 2023 07:01:14 GMT

Hi @Wobaffet,

I hope you are doing well.
Please accept my apologies for the delay in response.

Yes, your understanding is correct. Only four connections are required for the USB Serial Downloader mode.

Thanks & Regards,
Ritesh M Patel

Re: i.MX8MP USB Configuration for Serial Download Mode

Wobaffet — Mon, 24 Jul 2023 14:48:37 GMT

Hello, may I ask if VBUS is required for the RT1176 MCU to be in serial download mode or at least to be recognized as a USB device by the PC?