topic Re: OpenInventor (object-oriented 3D toolkit) support on linux i.mx6 in i.MX Processors

OpenInventor (object-oriented 3D toolkit) support on linux i.mx6

shabeerbadarudh — Fri, 17 May 2013 07:26:41 GMT

Hello friends,

I am very new on this community, and not sure wether this is the proper place to ask my question...

In our new Project we choose i.mx6 processor(Linux).and we are comforable with openInventor for GUI design. We have couple of doubts, given below

1. Linux BSP Package for OpenInventor available or not ?

2. If not is it possible to cross compile OpenInventor ?

3. If we use OpenInventor will it use I.mx6's IPU/VPU core?

If any one have idea please give a replay ASAP,

Thanks in Advance

Shabeer

Paul_Kuhn — Fri, 17 May 2013 17:22:51 GMT

Shabeer, Welcome! Congrats on your new project. I am going to move your post over to the i.MX Community.

YixingKong — Tue, 18 Feb 2014 03:55:01 GMT

Shabeer

We are sorry for getting back to you so late. Are you still stuck with the issue? If you have somehow to resolved the

issue, can we close the discussion? If you still need Freescale help, please feel free to contact us.

Thanks,
Yixing

YixingKong — Tue, 25 Feb 2014 06:11:45 GMT

Shabeer

We have not got your response yet and will close the discussion in 3 days. If you still need help, please feel free to

reply with an update to this discussion.
Thanks,
Yixing

shabeerbadarudh — Fri, 28 Feb 2014 05:42:58 GMT

Hi Yixing,

Sorry for the late replay. We droped the Open inventor,and using EGL libraries we done our application. Thank you very much for your replay..

Thanks & Regards

Shabeer

YixingKong — Fri, 28 Feb 2014 05:57:47 GMT

Shabeer

Thank you for your reply. I will close the DI. If you still need Freescale help, please feel free to contact us.

Thanks,
Yixing