i.MX ProcessorsのトピックRunning 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

isupriya — Mon, 22 May 2023 10:57:35 GMT

I am working with XEN Hypervisor on iMX8QM MEK, I have Linux operating system (L_VIRT_4.14.98_2.0.0_4.11_0.10_ga_images_MX8QMMEK) and Android Automotive OS (android_p9.0.0_2.3.5-auto_image_8qmek)

I was successfully able to run Domain-0 and DomU.

I'm driving my LVDS panel with my Embedded Linux operating system.I want to drive my HDMI panel with Android Automotive OS. Is this possible? How can I achieve this?

What should I change in device tree files or DomU configuration.Please guide.

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

Bio_TICFSL — Mon, 22 May 2023 15:50:08 GMT

Hello,

You need check and change the dtb in the device tree the deserializer node and the display timing inside the serializer node were causing an issue. Also just providing the deserializer I2C address in the serializer node is sufficient.

Regards

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

isupriya — Tue, 23 May 2023 06:57:26 GMT

Could you please elobrate a bit and explain as i am new to this topic.

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

isupriya — Tue, 23 May 2023 12:06:14 GMT

Also,

With the default Xen Configuration and running Linux and Android Auto OSes , is it expected that the LVDS0-ch0 gives out the Linux's display and the LVDS1_ch0 is configured with the Android Auto's display?

Cos, currently i am dealing with no signal in LVDS1_ch0

Please note that i am working with the prebuilt images , Linux operating system (L_VIRT_4.14.98_2.0.0_4.11_0.10_ga_images_MX8QMMEK) and Android Automotive OS (android_p9.0.0_2.3.5-auto_image_8qmek), and have followed all steps to get the Xen Hypervisor run 2 OSes.

When i execute >> xl list i see 2 domains in running state

when i execute >> xl console Domu, i see lot of logs with some errors and its stuck post that

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

Bio_TICFSL — Tue, 23 May 2023 12:50:44 GMT

Hello,

I guess this is device tree error check your device tree, Image-fsl-imx8qm-mek-jdi-wuxga-lvds1-panel.dtb: Supports the dual-channel LVDS panel, connecting the two mini-SAS ports with
the LVDS1 CH0 and LVDS1 CH1

Regards

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

rishabh_modi — Thu, 03 Apr 2025 05:18:33 GMT

Hi I am having this same issue. Were you able to resolve this and get android displayed on LVDS1_ch0?

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

Naresh123 — Wed, 04 Mar 2026 11:33:12 GMT

Hi @isupriya

I was doing the implementation of xen in imx8, could you please help me with the process.

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

shiva2 — Wed, 15 Apr 2026 11:43:43 GMT

@isupriya how you flashed i flashed same kernal but unbale to see the xen and command alos not working

Re: Running 2 OS with Xen Hypervisor with prebuilt linux Android auto, how to configure displays

Naresh123 — Thu, 16 Apr 2026 05:32:10 GMT

Hi @isupriya

could you please help me, how you have achieved the DOM0 after the xl list command entry and currently stuck at starting of DOM0.