i.MX ProcessorsのトピックRe: DSP can't ouput debug log on IMX8MP

DSP can't ouput debug log on IMX8MP

jimmyli — Thu, 04 May 2023 03:03:01 GMT

Hi,

We are trying to run HIFI4 dsp on IMX8MP, but encounter a question shown as below:

1>Linux version: L5.10.72-2.2.2

2>We do as 《i.MX DSP User's Guide》chapter 4.3, but uart4 can't output the log message.

Only in kernel, we can output the log message from uart4, the harware is ok.

Can you help to check and fix it?

Thanks very much.

----log screen shot.

jimmyli_0-1683169176524.png

Re: DSP can't ouput debug log on IMX8MP

Sanket_Parekh — Mon, 08 May 2023 09:49:18 GMT

Hi @jimmyli,

I hope you are doing well.

UART4 is used for Cortex-M7 core.
Disable UART4 in Linux OS & M7 core as DSP firmware runs on HiFi core.
In ATF, UART4 should be allocated to hifi4 core using RDC.

Thanks & Regards,
Sanket Parekh

Re: DSP can't ouput debug log on IMX8MP

jimmyli — Mon, 08 May 2023 08:44:16 GMT

Hi Dhruvit,

Got it.

Thanks very much.

Re: DSP can't ouput debug log on IMX8MP

Sanket_Parekh — Fri, 19 May 2023 09:56:44 GMT

Hello @jimmyli

I hope you are doing well.

I'm glad to help you, if the issue is solved, can I close the thread?

Thanks & Regards,

Sanket Parekh

Re: DSP can't ouput debug log on IMX8MP

jimmyli — Wed, 07 Jun 2023 05:45:36 GMT

Hi Sanket，

Sorry for replying too late.

Yes, we have resolve the problem.

Thanks very much.