i.MX ProcessorsのトピックRe: IMX8PLUS need enable MSI-X for M2 TPU accelerator

IMX8PLUS need enable MSI-X for M2 TPU accelerator

stanley71 — Tue, 25 Apr 2023 05:19:36 GMT

Hi. We are working with pycoral github tech support to allow integration of their M.2 Edge TPU accelerator for a upcoming gateway deployment. Tested OK on a Intel Atom SBC but we want to push out with a IMX8PLUS SBC.

uname -r
5.15.32+g613bd464a2ed

# lspci -v

00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01) (prog-if 00 [Normal decode])
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable+ 64bit-
Kernel driver in use: pcieport

01:00.0 System peripheral: Global Unichip Corp. Coral Edge TPU (prog-if ff)
Subsystem: Global Unichip Corp. Coral Edge TPU
Capabilities: [d0] MSI-X: Enable- Count=128 Masked-
Capabilities: [e0] MSI: Enable- Count=1/32 Maskable- 64bit+

Can you point to how we can enable MSI-X support for our board? Any possible CLI command or x-compiling an C-executable to enable support for this pcie device?

Thanks.

Re: IMX8PLUS need enable MSI-X for M2 TPU accelerator

iderzh — Tue, 02 May 2023 08:21:28 GMT

please attach dmesg log of IMX8PLUS with installed coral HW

Re: IMX8PLUS need enable MSI-X for M2 TPU accelerator

stanley71 — Thu, 04 May 2023 14:08:38 GMT

Thanks. Got it sorted with support from Coral/Google TPU github guys ... was problem with the MSI-X in the PCIe interface. It was disable in kernel so had to be enabled and recompiled. Works now.

Re: IMX8PLUS need enable MSI-X for M2 TPU accelerator

RenjithGopan — Tue, 23 Apr 2024 11:15:35 GMT

Hi,

I am facing exactly the same issue. I am using the same kernel version and the same board that you are using.

Please let us know the exact steps you followed to make it work.

Steps we followed:

1) Added the CONFIG_PCI_MSI=y in the kernel defconfig file

Please find my email if in case you have some idea on this.: R.Gopan@andersdx.com. (Renjith Gopan)

Thanks,

Renjith