i.MX ProcessorsのトピックRe: MFGTool source code

MFGTool source code

emilmyhrman — Mon, 28 Oct 2013 12:40:20 GMT

Hello

Where can I find the source code for MFGTool 3?

The only source I find is for v2.

regards

Emil

Re: MFGTool source code

Rita_Wang — Tue, 29 Oct 2013 03:07:00 GMT

Hi Emil,

It's true that you can catch the source of MFGTool 2, but we do not have released MFGTool 3 in freescale official website.

Best Regards,

Dan

Re: MFGTool source code

emilmyhrman — Tue, 29 Oct 2013 13:02:00 GMT

Hi Dan

Do you plan to release v3 also?

I was trying to use command line arguments to select which command list to use, it does not seem to work on v3 but in the source for v2 there is code for that.

Regards,

Emil

Re: MFGTool source code

Rita_Wang — Wed, 30 Oct 2013 02:35:04 GMT

Hi Emil,

About the v3 I asked our design team, we have no plan by now. Are you facing problems when you use MFGTool 2 on i.MX6?

Best Regards,

Dan

Re: MFGTool source code

emilmyhrman — Wed, 30 Oct 2013 12:07:18 GMT

Maybe I'm just confused of what versions are available.

I've downloaded "Mfgtools-Rel-3.0.0_121207_MX6DL_UPDATER" and "Mfgtools-Rel-4.1.0_130816_MX6Q_UPDATER" they both have a MfgTool2.exe.

The Rel-4.1.0 version of MfgTool2.exe says "Library: 2.2.3" in the title.

Does this mean they both use mfgtool v2? Thus, if I build the source code for MFGTool 2 you've release, it should be the same version (more or less) as the one in Rel-3.0.0 and Rel-4.1.0?

Re: MFGTool source code

Rita_Wang — Thu, 31 Oct 2013 05:24:05 GMT

Hi Emil,

Yes ,they both use mfgtool v2. The products of i.MX6 all are using the mfgtool v2 to download. And all IMX_MFG_TOOL_V2_SOURCE are the same. Dear Emil , I think you maybe make a mistake, the number of 4.1.0 is the version of BSP . Towards the "Mfgtools-Rel-3.0.0_121207_MX6DL_UPDATER" and "Mfgtools-Rel-4.1.0_130816_MX6Q_UPDATER" you have downloaded, the most differences are the files under the Profiles in Mfgtools.

Don't be confused, it's easy to decide.

If you are using i.MX6Q , you can go to http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&fpsp=1&tab=Design_Tools_Tab ,the related mfgtool is under Hardware Development Tools /Programmers.

If you are using other i.MX6 products ,the methods are the same.

Hope this can help you~~ Any questions are pleasure.

Best Regards,

Dan

Re: MFGTool source code

emilmyhrman — Fri, 01 Nov 2013 08:59:37 GMT

That explains it, thanks!