i.MX ProcessorsのトピックRe: Using Segger j-link with IMX8M plus

Using Segger j-link with IMX8M plus

niklasbergdahl — Tue, 11 May 2021 09:27:31 GMT

Are there any device-files to use with segger when debugging the M7 of an IMX8M Plus?
I'm trying to debug the M7 of an i.MX 8M Plus EVK, but run into trouble when trying to connect and reset.

Re: Using Segger j-link with IMX8M plus

igorpadykov — Tue, 11 May 2021 10:46:00 GMT

Hi Niklas

one can try IAR and SEGGER tool patch for i.MX8M Plus devices

and SDK_EVK-MIMX8MP available on

https://mcuxpresso.nxp.com/en/welcome

Best regards
igor

Re: Using Segger j-link with IMX8M plus

illy777 — Wed, 29 Mar 2023 07:27:43 GMT

Hi there, is there an updated solution, because this doesn't work properly or I'm doing something wrong.

I'm on Windows 10, using the J-Flash 7.86 version: There is no support for the MIMX8MPRM devices.. I alredy did what the readme of the file above told and also tried downloading the instructions of the J-Link page - debugger starter kit.

Therefore I put the files in following order in the %APPDATA%/../SEGGER-folder:

I also changed the .xml file:

It would help me a lot if anyone know further details or can reach me a hand!

Thank you!