topic Re: Mfgtool2 conga-QMX6 example in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241838#M20288 <HTML><HEAD></HEAD><BODY><P>Thank you for the information.</P></BODY></HTML> Wed, 04 Dec 2013 12:40:47 GMT j-g 2013-12-04T12:40:47Z Mfgtool2 conga-QMX6 example https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241836#M20286 <HTML><HEAD></HEAD><BODY><P>Are there any examples available on how to use mfgtool2 to write Linux kernel/rootfs to the onboard emmc on the conga-QMX6?&nbsp; Meaning what to put in to ucl2.xml.&nbsp; Thanks!</P></BODY></HTML> Tue, 03 Dec 2013 20:48:50 GMT https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241836#M20286 j-g 2013-12-03T20:48:50Z Re: Mfgtool2 conga-QMX6 example https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241837#M20287 <HTML><HEAD></HEAD><BODY><P>We do not have documentation on how to flash a conga board, we have a couple of documents that explain the UCL usage, tough I'm not sure if it'll work with a non-freescale board.</P><P>It should be intestresting to know the results...</P><P></P><P>Both documents are attached...</P></BODY></HTML> Tue, 03 Dec 2013 21:08:11 GMT https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241837#M20287 SergioSolis 2013-12-03T21:08:11Z Re: Mfgtool2 conga-QMX6 example https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241838#M20288 <HTML><HEAD></HEAD><BODY><P>Thank you for the information.</P></BODY></HTML> Wed, 04 Dec 2013 12:40:47 GMT https://community.nxp.com/t5/i-MX-Processors/Mfgtool2-conga-QMX6-example/m-p/241838#M20288 j-g 2013-12-04T12:40:47Z