i.MX ProcessorsのトピックiMXRT1170 Boot from eMMC boot1 partition

iMXRT1170 Boot from eMMC boot1 partition

yangaichimantou — Wed, 08 Feb 2023 06:36:15 GMT

Hi,

Now We can boot from eMMC User Area partition by MCU BootUtility.

However,when we try to boot from eMMC boot1 partition.

It can not work.

We want to know how to set the configuration of MCU BootUtility or other modification of the system to

let the iMXRT1170 boot from Boot1 partition?

Hope for your reply.

EdwinHz — Mon, 13 Feb 2023 18:55:35 GMT

Is the issue discussed on the following community post related to what you are experiencing? https://community.nxp.com/t5/i-MX-RT/Boot-loader-behaviour-on-i-MX-RT-1021/m-p/1468975

Also, have you looked into the MCU BootUtility owner's blog? https://www.cnblogs.com/henjay724/

BR,

Edwin

yangaichimantou — Tue, 14 Feb 2023 01:39:47 GMT

No, my main problem is not with MCU BootUtility.

I want to boot from eMMC boot1 partition.This is our main problem.

Now we can boot from eMMC user data partition.

Greenhal — Wed, 26 Jun 2024 10:52:05 GMT

Hi,

I also try to boot from eMMC boot1 partition but without success.

Did you resolve the problem? Can you share the solution?

Greenhal — Thu, 11 Jul 2024 09:41:17 GMT

I have found a way to boot from the eMMC boo1 partition with MIMXRT1170-EVKB. Below you can find the steps to make it work:

Set target setup as follows
Click the “Boot device Configuration” button and set all the fields as presented below
Set the MiMXRT board in SDP Mode and load the image
Power off the board
Set the boot switches as follows - sw1 "0.0.1.0" sw2 "1.0.0.0.0.0.0.1.0.0"
Power on the board
The software loaded to the eMMC boot 1 partition should start