topic Re: IMX6Q boot failed in i.MX Processors

IMX6Q boot failed

yacheng_zhang — Fri, 13 Jan 2023 02:53:31 GMT

Hi !

I am tring to design IMX6Q board.But something wrong.i set BOOT_MODE0 is 0 ,BOOT_MODE1 is 0,BOOT from fuses.It can be boot success.(But there is actually mistake,i meant to internal boot Mode).

so i change boot setting,BOOT_MODE0 is 1,BOOT_MODE1 is 0.but it does not boot success.

The general phenomenon is that after i set BOOT pin to boot from fuses(Boot success!),then i set BOOT pin to boot from internal Boot Mode,But the board can not boot properly.

so i wonder why.

thank you

Yacheng Zhang

Re: IMX6Q boot failed

Rita_Wang — Fri, 13 Jan 2023 05:52:24 GMT

BOOT_MODE0 is 1,BOOT_MODE1 is 0 go to Serial download mode, details you can see in the RM:

Re: IMX6Q boot failed

yacheng_zhang — Tue, 31 Jan 2023 01:34:41 GMT

Sorry,There are mistakes in my word.In fact,i set BOOT_MODE0 is 0,BOOT_MODE1 is 1,It should be boot form internel,but it failed to boot.Then i try to set BOOT_MODE0 is 0,BOOT_MODE1 is 0,It should be boot from fuses,And it boot successfully.

So i want to know why failed boot from internel.

thanks