How to verify real time edge 2.2 function ?

t2865k5 — Tue, 03 Jan 2023 09:43:49 GMT

Dear NXP,

HW platform : imx8mplus

SW:5.10.72 + Real-time Edge 2.2

(1) I refer to the Real-time Edge Yocto Project User Guide.docx . I build a imx-image-multimedia-imx8mp-lpddr4-evk.wic image (5.10.72 + Real-time Edge 2.2) to download to SD card ,and run command as follows:

stress -i 4 --vm 10 --vm-bytes 10M --vm-hang 100 --timeout 100s
cyclictest --smp -p90 -m

(2) I download imx-image-multimedia-imx8mpevk.wic (5.10.72) to SD card ,and run command as follows:

stress -i 4 --vm 10 --vm-bytes 10M --vm-hang 100 --timeout 100s
cyclictest --smp -p90 -m

(3) The actual difference between the two is not big in maximum latency time.

Could you tell me how to verify real time edge function?

Re: How to verify real time edge 2.2 function ?

AldoG — Thu, 05 Jan 2023 23:50:22 GMT

Hello,

Please refer to the Real-Time Edge Software User Guide chapter 3.1.1 System Real-time Latency tests.

Best regards,
Aldo.

topic Re: How to verify real time edge 2.2 function ? in i.MX Processors

How to verify real time edge 2.2 function ?

Re: How to verify real time edge 2.2 function ?