topic Re: Bitbake nxp-image-real-time-edge error (version :2.2) in i.MX Processors

Bitbake nxp-image-real-time-edge error (version :2.2)

t2865k5 — Fri, 23 Dec 2022 07:40:18 GMT

Dear NXP ,

HW platform : imx8mplus

SW : nxp-image-real-time-edge 2.2

Please refer to my steps:

$ mkdir yocto-real-time-edge
$ cd yocto-real-time-edge
$ repo init -u https://github.com/real-time-edge-sw/yocto-real-time-edge.git -b real-time-edge-hardknott -m real-time-edge-2.2.0.xml
$ repo sync

DISTRO=nxp-real-time-edge MACHINE=imx8mp-lpddr4-evk source real-time-edge-setup-env.sh -b real-time-build

$ bitbake nxp-image-real-time-edge

Please refer to the error message (image.png).

Please help to fix this issue .

Re: Bitbake nxp-image-real-time-edge error (version :2.2)

t2865k5 — Fri, 23 Dec 2022 09:11:35 GMT

Dear NXP ,

I have solved some compiler error but it still have a compiler error. Please refer to the new1_error.jpg.
Please unzip the harpoon-apps.7z . Please help chechk the harpoon-apps.inc.

Please help fix this issue .

Re: Bitbake nxp-image-real-time-edge error (version :2.2)

Zhiming_Liu — Mon, 26 Dec 2022 03:15:52 GMT

Hi @t2865k5

Please try this change:

Re: Bitbake nxp-image-real-time-edge error (version :2.2)

t2865k5 — Tue, 27 Dec 2022 08:57:33 GMT

Dear NXP ,

Please refer to the attached picture. This is a new build error .

Please help fix this issue .

Re: Bitbake nxp-image-real-time-edge error (version :2.2)

t2865k5 — Wed, 28 Dec 2022 09:33:29 GMT

Dear NXP,

I added some descriptions in harpoon-apps.inc. It can fix "Missing SRC_URI checksum" issue .

But there is a new build error .

ERROR: harpoon-apps-rt-latency-2.0-r0 do_configure: Execution of '/home/albert/project/yocto-real-time-edge/real-time-build/tmp/work/imx8mp_lpddr4_evk-poky-linux/harpoon-apps-rt-latency/2.0-r0/temp/run.do_configure.1268406' failed with exit code 1

Please help fix this issue .

Re: Bitbake nxp-image-real-time-edge error (version :2.2)

t2865k5 — Tue, 03 Jan 2023 09:05:04 GMT

Thank you for your help ! I have fixed this issue.