Run Xen on imx8QXP Board.

paraspahwa08 — Fri, 16 Dec 2022 06:00:40 GMT

i.MX 8 Family | i.MX 8QuadMax (8QM) | 8QuadPlus

I'm trying to build xen on imx8qxp board. I followed the steps mentioned on the document i.MX Yocto Project User's Guide. Followed the same steps mentions but xen didn't worked. Could anyone please send the step by step guide or any reference document available to run xen on imx8qxp

Re: Run Xen on imx8QXP Board.

Dhruvit — Tue, 20 Dec 2022 09:16:15 GMT

Hi @paraspahwa08,

In older BSP ( L4.14.98-2.0.0_ga) Type 1 hypervisor Xen is part of the boot loader

and steps to Run Xen can be found in chapter 3 in i.MX Virtualization User's Guide

In Latest BSP ( LF5.15.71_2.2.0 ), type 1 hypervisors are part of the loader But Xen is not currently supported

one can refer to section 2.3 Boot Image in i.MX Linux Reference Manual

I hope it helps!

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Thanks & Regards,
Dhruvit.

topic Re: Run Xen on imx8QXP Board. in i.MX Processors

Run Xen on imx8QXP Board.

Re: Run Xen on imx8QXP Board.