https://community.nxp.com/t5/i-MX-Processors/Config-Tools-for-i-MX-Change-Functional-Group/m-p/1559973#M198019 <P>In Config Tools for i.MX, is it possible to switch pins between functional groups? If so then how is this done? Or is it necessary to un-route the pin and then re-route it again in the new functional group?</P> Fri, 25 Nov 2022 12:42:42 GMT daneduplooy 2022-11-25T12:42:42Z https://community.nxp.com/t5/i-MX-Processors/Config-Tools-for-i-MX-Change-Functional-Group/m-p/1559973#M198019 <P>In Config Tools for i.MX, is it possible to switch pins between functional groups? If so then how is this done? Or is it necessary to un-route the pin and then re-route it again in the new functional group?</P> Fri, 25 Nov 2022 12:42:42 GMT https://community.nxp.com/t5/i-MX-Processors/Config-Tools-for-i-MX-Change-Functional-Group/m-p/1559973#M198019 daneduplooy 2022-11-25T12:42:42Z https://community.nxp.com/t5/i-MX-Processors/Config-Tools-for-i-MX-Change-Functional-Group/m-p/1560326#M198063 <P>Hi&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/205435">@daneduplooy</a>,</P> <P>I hope you are doing well.</P> <P>One can click on any particular pin and you will see the possible muxing options from different functional groups. One can select any particular functional group and that particular pin would be routed to the selected function.</P> <P>Thanks &amp; Regards,<BR />Ritesh M Patel</P> Mon, 28 Nov 2022 05:59:31 GMT https://community.nxp.com/t5/i-MX-Processors/Config-Tools-for-i-MX-Change-Functional-Group/m-p/1560326#M198063 riteshmpatel 2022-11-28T05:59:31Z