i.MX ProcessorsのトピックRe: "programming algorithm" in KEILMDK -> Utilities tab for NXP MIMXRT1170-EVK

"programming algorithm" in KEILMDK -> Utilities tab for NXP MIMXRT1170-EVK

SakSath — Mon, 08 Aug 2022 05:57:39 GMT

Hi,

I am trying to flash a demo application built on KEIL MDK on to MIMXRT1170-EVK.

However I am currently facing the below issue:

I am new to NXP MIMXRT1170-EVK and after initial search about the issue I am facing I see some suggestions to change the "Programming algorithm".

However, I find little information about this in the getting started guide of the board.

Can You please help with the appropriate settings for successful flash and debugging?

Re: "programming algorithm" in KEILMDK -> Utilities tab for NXP MIMXRT1170-EVK

jay_heng — Mon, 08 Aug 2022 06:32:49 GMT

You can refer to below blog (it is in Chinese)

https://www.cnblogs.com/henjay724/p/15465655.html

Re: "programming algorithm" in KEILMDK -> Utilities tab for NXP MIMXRT1170-EVK

SakSath — Mon, 08 Aug 2022 09:34:18 GMT

Hi @jay_heng ,

Thanks!

I was able to resolve the flashing issue with the help of settings from another demo project. I will close this post.