https://community.nxp.com/t5/i-MX-Processors/RT1060-EVK-TSC/m-p/1495046#M193000 <P>Hello,</P> <P>This case was reported in 478382 and is followed internally.</P> <P><SPAN>Best regards,<BR />Pavel</SPAN></P> <P>&nbsp;</P> Mon, 25 Jul 2022 22:06:59 GMT Pavel_Hernandez 2022-07-25T22:06:59Z https://community.nxp.com/t5/i-MX-Processors/RT1060-EVK-TSC/m-p/1492539#M192774 <P>Hello All,</P><P>I am trying to get a TSC driver for a RT1060 EVK board working but am having some trouble. Using the reference manual I know what GPIO and channels I am supposed to used but am still confused on how to configure the ADC channels and triggers for these. If anyone can help expand on how they set up their configuration or maybe provide a .mex file that would be greatly appreciated.</P><P>Thank you!</P> Wed, 20 Jul 2022 14:25:22 GMT https://community.nxp.com/t5/i-MX-Processors/RT1060-EVK-TSC/m-p/1492539#M192774 RLennox 2022-07-20T14:25:22Z https://community.nxp.com/t5/i-MX-Processors/RT1060-EVK-TSC/m-p/1495046#M193000 <P>Hello,</P> <P>This case was reported in 478382 and is followed internally.</P> <P><SPAN>Best regards,<BR />Pavel</SPAN></P> <P>&nbsp;</P> Mon, 25 Jul 2022 22:06:59 GMT https://community.nxp.com/t5/i-MX-Processors/RT1060-EVK-TSC/m-p/1495046#M193000 Pavel_Hernandez 2022-07-25T22:06:59Z