i.MX ProcessorsのトピックThe iled_blinky project does not automatically generate linker scripts.

The iled_blinky project does not automatically generate linker scripts.

stanley-kylee — Mon, 20 Jun 2022 04:41:37 GMT

hello.
I am trying to 'SDRAM boot' from 'MIMXRT1020-EVK'.

I am following the contents of the link below.
(https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/I-MX-RT-How-to-booting-to-SDRAM/ta-p/1125054)

If you look at 'Step 4', MCUXpresso automatically creates a linker script.
However, the linker script is not automatically generated.
I am working on the same 'iled_blinky' project as the manual.

Why aren't the linker script folders and files created automatically?
If I need to create a linker script file myself, what should I name the file?

P.s. Manage linker script is checked

Re: The iled_blinky project does not automatically generate linker scripts.

jeremyzhou — Mon, 20 Jun 2022 06:34:37 GMT

Hi,
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
1) Why aren't the linker script folders and files created automatically?
-- Please check whether compile or build the project again after finishing the configuration's modification
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: The iled_blinky project does not automatically generate linker scripts.

stanley-kylee — Mon, 20 Jun 2022 10:39:47 GMT

Hello jeremyzhou.

Thank you for your reply.

-- Please check whether compile or build the project again after finishing the configuration's modification
→ Yes. I compiled after setup.

However, the 'linkerscripts' folder was not created.

Re: The iled_blinky project does not automatically generate linker scripts.

jeremyzhou — Tue, 21 Jun 2022 01:58:33 GMT

Hi,
Thanks for your reply.
In the post (https://community.nxp.com/t5/i-MX-RT-Knowledge-Base/I-MX-RT-How-to-booting-to-SDRAM/ta-p/1125054), the linker script means the linker file actually, and you can find them as the figure shows.

jeremyzhou_0-1655776657009.png

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

Re: The iled_blinky project does not automatically generate linker scripts.

stanley-kylee — Tue, 21 Jun 2022 01:38:00 GMT

I don't understand.

When compiling other example projects, the linkerscripts folder is created, and linker script files (*.ld) are located in it.

However, the linkerscripts folder and '*.ld' files are not created in this project.

Does the linker script file mentioned in that link mean the *.ld file created in the Debug or Release folder?

Re: The iled_blinky project does not automatically generate linker scripts.

jeremyzhou — Tue, 21 Jun 2022 07:12:28 GMT

Hi,
Thanks for your reply.
1) Does the linker script file mentioned in that link mean the *.ld file created in the Debug or Release folder?
-- Yes.
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!