topic Re: FreeRTOS stuck in prvPortStartFirstTask (MCUXpresso IDE) in i.MX Processors

FreeRTOS stuck in prvPortStartFirstTask (MCUXpresso IDE)

adde_ado — Mon, 30 May 2022 04:23:28 GMT

I am trying to run/debug freertos_hello example code that is provided by NXP (SDK_2_11_1_MIMX8ML8xxxLZ) and I'm running into this problem at startup.

For debugging I'm using SEGEGR J-Link debugger (device MIMX8ML8_M7).

MCUXpresso version is v11.5.1 [Build 7266] [2022-04-13].

Does anyone have any idea why this happens?

Best regards,

Adde

Re: FreeRTOS stuck in prvPortStartFirstTask (MCUXpresso IDE)

joanxie — Mon, 30 May 2022 06:14:45 GMT

MCUXpresso IDE doesn't support imx8mp, only IAR and GCC

Re: FreeRTOS stuck in prvPortStartFirstTask (MCUXpresso IDE)

adde_ado — Mon, 30 May 2022 07:49:00 GMT

Are you 100% sure, my FreeRTOS application is running on Cortex-M7?

This was not the case with i.MX8M-Mini. Am I right?

Best regards,

Adde

Re: FreeRTOS stuck in prvPortStartFirstTask (MCUXpresso IDE)

joanxie — Sat, 04 Jun 2022 09:57:07 GMT

I suggest that you can refer to the release note in the SDK document folder, current MCUXpresso IDE couldn't support imx8mm, but you can use IAR or GCC