topic Re: Real Time Edge Software in imx8 question in i.MX Processors

Real Time Edge Software in imx8 question

charleshuang — Fri, 29 Apr 2022 09:57:16 GMT

Hi NXP Team

NXP release the real-time-edge-software.

Follow the User-Guide and Yocto Project Guide.

Our BSP is Yocto 3.3 and kernel version is 5.10.35.

How to do porting the Real-time Edge Yocto?

(1) In Edge Software 2.0, Linux 5.10.9-rt24 is the base of Linux kernel.

(2) In Edge Software 2.1, Linux 5.10.52-rt47 is the base of Linux kernel.

Our Current BSP (kernel version) does not match.

Do you have any advice?

jim_lin — Wed, 04 May 2022 01:18:35 GMT

Hello Charles,

if you don't plan to port on your own, or don't have the resources to do so,

you can contact NXP profession support or other software 3rd parties you preferred for the porting.

Best regards,

Jim

charleshuang — Tue, 17 May 2022 08:03:48 GMT

Hello NXP and NXP(Jim)

Real Time Edge Software v2.2 for IMX8MM

I cannot boot up on imx8MM Demo Board. Please help to check it. Thanks.