NXP IMX8MM Custom Board not Booting up

Raghavendra — Wed, 06 Apr 2022 08:12:19 GMT

Hi Team,

We have design our custom board with IMX8MM SoC and below are the variations from EVK.

we have verified all power rail voltages from PMIC and external power supply and all are Ok.

And there is no response either from USB and UART.

Queries.

1. Do we have any procedure to follow for first time flashing other than UUU.

2. any other way to debug the current state board. since there USB/UART is not working

3. Tried booting from SD Card, but didn't see any booting.

4. what would be the state of IMX8MM SoC after fabricating into the board.

Thanks,

Raghavendra

Re: NXP IMX8MM Custom Board not Booting up

Raghavendra — Sun, 24 Apr 2022 17:15:11 GMT

Hi,

we have fixed this issue.

Thanks for your response.