i.MX ProcessorsのトピックRe: Help: LTIB build failed

Help: LTIB build failed

danix — Thu, 05 May 2011 15:48:16 GMT

Hi folks,

I'm trying to install and build LTIB as in the installation guide in the BSP, but I got the following error while building it;

Copying packages to /home/danny/ltib/pkgs

Installation complete, your ltib installation has been placed in
/home/danny/ltib, to complete the installation:

cd /home/danny/ltib
./ltib

danny@danny-beast:~$ cd /home/danny/ltib
danny@danny-beast:~/ltib$ ./ltib
sh: g++: not found
sh: tclsh: not found

ltib cannot be run because one or more of the host packages needed to run it
are either missing or out of date or not in ltib's standard path. Please
install/upgrade these packages on your host. If you have your own utilities
in non-standard paths, please add an entry into the .ltibrc file for example:

%path_std
/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/my/own/exes

Package                Minimum ver   Installed info
-------                -----------   ---------------
libstdc++              0             not installed
gcc-c++                2.96          not installed
zlib-devel             0             not installed
rpm                    0             not installed
rpm-build              0             not installed
ncurses-devel          0             not installed
m4                     0             not installed
bison                  0             not installed
patch                  0             not installed
tcl                    0             not installed

Died at ./ltib line 1397.
traceback:
main::host_checks:1397
main:542

Started: Thu May 5 18:32:58 2011
Ended:   Thu May 5 18:32:58 2011
Elapsed: 0 seconds

Build Failed

Exiting on error or interrupt
danny@danny-beast:~/ltib$

what should I do, then...

PS: I'm new to LTIB and even to Linux, so forgive me if that is a stupid question

Re: Help: LTIB build failed

MarianoGoluboff — Thu, 05 May 2011 21:20:31 GMT

You don't have the necessary packages installed on your Linux host. What distribution of Linux are you using as your host machine?

Re: Help: LTIB build failed

MarianoGoluboff — Thu, 05 May 2011 21:24:35 GMT

By the way, if you're on Ubuntu, read this:

http://imxcommunity.org/group/ubuntutipsandtricks/forum/topics/another-ltib-installation

(and you should join the "Ubuntu Tips and Tricks" group if you haven't already)

Re: Help: LTIB build failed

danix — Fri, 06 May 2011 05:18:18 GMT

Thanks man,

Yes I'm using Ubuntu 9.04

Re: Help: LTIB build failed

danix — Fri, 06 May 2011 16:43:49 GMT

Hey Mariano,

I run the script from the link you suggested, but after installing tons of packages it stops at

Installing mutter...
E: Couldn't find package mutter

I couldn't find mutter for Ubuntu 9.04 in the repository. Used mutter for other versions anyway, but it in turn requires

gtk+-3.0 or above which I couldn't find anywhere...ahh

What is the solution for these?

thanks

Re: Help: LTIB build failed

MarianoGoluboff — Fri, 06 May 2011 17:16:57 GMT

I don't think you need mutter for LTIB. That package is installed to setup a machine for Android development. So you could try running LTIB now and see if you're up and running.

Re: Help: LTIB build failed

danix — Sat, 07 May 2011 08:56:42 GMT

hey,

so, i configured ltib with "./ltib -m config" successfully. but when I run it "./ltib" after running for about 20 minuits it reported like this:

/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/../../../../arm-none-linux-gnueabi/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make[2]: *** [dbus-launch] Error 1
make[2]: *** Waiting for unfinished jobs....
gcc -ffunction-sections -fdata-sections -g -O2 -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -Wdeclaration-after-statement -fno-common -o .libs/dbus-send dbus-print-message.o dbus-send.o ../dbus/.libs/libdbus-1.so
creating dbus-send
make[2]: Leaving directory `/home/danny/ltib/rpm/BUILD/dbus-1.2.3/tools'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/danny/ltib/rpm/BUILD/dbus-1.2.3'
make: *** [all] Error 2
error: Bad exit status from /home/danny/ltib/tmp/rpm-tmp.7723 (%build)

RPM build errors:
Bad exit status from /home/danny/ltib/tmp/rpm-tmp.7723 (%build)
Build time for dbus: 35 seconds

Failed building dbus

f_buildrpms() returned an error, exiting
traceback:
main:560

Started: Sat May 7 11:24:30 2011
Ended: Sat May 7 11:29:19 2011
Elapsed: 289 seconds

These packages failed to build:
dbus

Build Failed

Exiting on error or interrupt

How can I fix that....

BTW: Freescale's documentation sucks big time!... I missed the days I played with TI's and Atmel's products

Re: Help: LTIB build failed

MarianoGoluboff — Mon, 09 May 2011 15:52:59 GMT

Not sure why you're having a library linker problem (ld can't find -lX11). One possible problem is that there ltib left some residual stuff when you ran it without all the necessary packages installed.

Pay very close attention to this post:

http://imxcommunity.org/group/ubuntutipsandtricks/forum/topics/building-ltib-in-ubuntu-1004

Re: Help: LTIB build failed

danix — Tue, 17 May 2011 17:05:46 GMT

Hey,

Can't get past the linker problem (ld can't find -lx11). It brings this up when it tries to build dbus

it been a week trying to figure out, what options do I have,...please share your experience

Re: Help: LTIB build failed

MarianoGoluboff — Tue, 17 May 2011 19:25:44 GMT

Hi Daniel,

I haven't seen these problems before, and I've used ltib on Ubuntu 9.04, so it can be done. What I would suggest at this point is to completely remove ltib (and the /opt/freescale directory), then re-install after making sure that your Ubuntu box is setup per the instructions in my second post on this thread.

If you don't want to run that script and instead manually figure out what to do, you should follow the steps here:

http://www.imxdev.org/wiki/index.php?title=ALL_Boards_ltib_config_ubuntu

After you have that setup, then install and re-run LTIB.

If you're still getting this problem, then go to freescale.com, login to "My Freescale", and click on Enter a Service Request to get an apps engineer from Freescale to help you out.

Mariano

Re: Help: LTIB build failed

danix — Wed, 18 May 2011 07:55:13 GMT

Now it builds successfully...

Thanks a ton, Mariano!

Re: Help: LTIB build failed

AdCmo — Wed, 16 Nov 2011 00:31:07 GMT

I installed LTIB to /opt/freescale on Ubuntu 11.10 and I am getting a similar error though I know I installed zlib.
This is the error I am getting:

ltib cannot be run because one or more of the host packages needed to run it
are either missing or out of date or not in ltib's standard path. Please
install/upgrade these packages on your host. If you have your own utilities
in non-standard paths, please add an entry into the .ltibrc file for example:

%path_std
/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/my/own/exes

Package                Minimum ver   Installed info
-------                -----------   ---------------
zlib                   0             not installed

Died at ./ltib line 1397.
traceback:
main::host_checks:1397
main:542

Exiting on error or interrupt

When i try to reinstall "zlib1g-dev" it says I already have the newest version.

I am using ltib 9.1.1 ($Revision: 1.445.6.1 $)

Anything else I am missing?

Thanks,

Ad.

Mariano Goluboff said:

Hi Daniel,
I haven't seen these problems before, and I've used ltib on Ubuntu 9.04, so it can be done. What I would suggest at this point is to completely remove ltib (and the /opt/freescale directory), then re-install after making sure that your Ubuntu box is setup per the instructions in my second post on this thread.

If you don't want to run that script and instead manually figure out what to do, you should follow the steps here:
http://www.imxdev.org/wiki/index.php?title=ALL_Boards_ltib_config_u...

After you have that setup, then install and re-run LTIB.

If you're still getting this problem, then go to freescale.com, login to "My Freescale", and click on Enter a Service Request to get an apps engineer from Freescale to help you out.

Mariano

Re: Help: LTIB build failed

KrishnaPavan — Wed, 16 Nov 2011 05:40:49 GMT

Hi Ad,

Have you installed all the packages related to zlib.

zlib1g-dbg,zlib1g-dev,zlib1g,etc...

Regards ::: krishna pavan

Re: Help: LTIB build failed

AdCmo — Wed, 16 Nov 2011 15:39:54 GMT

Krishna,

Yes, I installed all zlib1g* packages i.e.

zlib1g, zlib1g-dbg, zlib1g-dev and libghc-zlib-dev.

I cannot find zlib-devel with aptitude, will this be an issue?

Thanks,
Ad.
-----------------------------------------------

Re: Help: LTIB build failed

daiane_angolini — Wed, 16 Nov 2011 16:12:29 GMT

I hope this can help you

http://imxcommunity.org/forum/topics/ltib-not-compiling

Re: Help: LTIB build failed

AdCmo — Wed, 16 Nov 2011 16:36:15 GMT

Daiane,

That did not help :(

One poster mentioned that they were able to install zlib, buyt they never mentioned how

or from what package.

Even when running a command to list the installed packages I get an interrupt error.

i.e.

./ltib -m listpkgs
Please specify the preconfig to list, or configure your ltib
traceback:
main::get_key_list:101
main::listpkgs:88
main::f_listpkgs:1206
main:535

Exiting on error or interrupt

Maybe something else going on?

thanks,

Ad.

Re: Help: LTIB build failed

SyedRafiulHussa — Mon, 13 Feb 2012 22:46:33 GMT

Hi,

I am also getting same error:

Exiting on error or interrupt

I also tried to install zlib package. However, when I go to install zlib package, it says that "Unable to locate package zlib". I've checked related previous posts of this group. Sadly, I've found no specific solution for it. Currently, at this point I got badly stuck with this problem. I am eagerly looking forward for your help.

Thanks.

Re: Help: LTIB build failed

andrew_questps — Tue, 14 Feb 2012 03:25:40 GMT

The errors are related to ltib/bin/Ltibutils.pm.

On my x64 VM with Ubuntu 11.04 I had to add the following line (it was slightly different for an x86 VM):

glob('/lib/x86_64-linux-gnu/libz.so*'),

on about line 583 where the "zlib => sub" line is in order for ltib to find the library.

Re: Help: LTIB build failed

KrishnaPavan — Tue, 14 Feb 2012 05:16:19 GMT

Hi,

// ltib cannot be run because one or more of the host packages missing //

//when I go to install zlib package, it says that "Unable to locate package zlib".//

zlib package can be installed from the Software Sources/Synaptics.

If you are using proxy, then probably you should check that preferences section and authenticate it!

Regards :: Krishna Pavan

Re: Help: LTIB build failed

KursadOney — Wed, 15 Feb 2012 16:58:57 GMT

Try this patch if you haven't already:

diff --git a/bin/Ltibutils.pm b/bin/Ltibutils.pm
index 76e2506..7464795 100755
--- a/bin/Ltibutils.pm
+++ b/bin/Ltibutils.pm
@@ -580,7 +580,9 @@ TXT
                          unless -f '/usr/share/texmf/tex/texinfo/texinfo.tex';
                         `makeinfo --version 2>/dev/null`;
                     },
-    zlib         => sub { my @f = (glob('/usr/lib/i386-linux-gnu/libz.so*'),
+    zlib         => sub { my @f = (glob('/usr/lib/libz.so*'),
+                                   glob('/lib/libz.so*'),
+                                   glob('/usr/lib/i386-linux-gnu/libz.so*'),
                                    glob('/lib/i386-linux-gnu/libz.so*'),
                                    glob('/lib64/libz.so*') ); @f > 1 ? 1 : 0 },
     'zlib-devel' => sub { -f '/usr/include/zlib.h' },

Make sure libz.so points to the correct one in your system.