i.MX Processors中的主题 Re: Shematics on MCIMX6Q-SD

Shematics on MCIMX6Q-SD

christophe — Thu, 24 Jan 2013 11:28:59 GMT

Hi,

We don't have Allegro software and consequently we can't import .brd file on our shematics software (Altium).

Could be possible someone from Freescale send us schematics for the Sabre MCIMX6Q-SD, exported into a 16.2 version (version after 16.2 are not supported on Altium).

Thanks,

CC.

Re: Shematics on MCIMX6Q-SD

Yuri — Fri, 25 Jan 2013 05:25:19 GMT

Please try the enclosed.

Re: Shematics on MCIMX6Q-SD

christophe — Fri, 25 Jan 2013 08:45:10 GMT

Hi Yuri,

What do you mean ?

In the Sabre box, the sd card contains only android stuff. And on the Freescale's site, design files are with Allegro format.

Rgds,

Christophe.

Re: Shematics on MCIMX6Q-SD

christophe — Fri, 25 Jan 2013 08:48:31 GMT

Sorry, i haven't seen the joint file. I try it.

Re: Shematics on MCIMX6Q-SD

christophe — Fri, 25 Jan 2013 09:12:03 GMT

Hi Yuri,

No, it doesn't work. Now, i remember: it was the same thing with the IMX53QSB. The only way is to export the schematics with Allegro/Orcad under a 16.2 version. Ask to Mark Middleton, he's the designer of the board.

Rgds,

Christophe.

Re: Shematics on MCIMX6Q-SD

Yuri — Mon, 28 Jan 2013 10:21:55 GMT

The file ORCAD_16_2.zip was from Mark.
I can read it in OrCad 9.1.

Enclosed is the same file, saved in OrCad 7_2 format.

Re: Shematics on MCIMX6Q-SD

christophe — Tue, 29 Jan 2013 07:38:01 GMT

Hi Yuri,

It works fine with Altium.

Thank you.

Rgds,

Christophe.

Re: Shematics on MCIMX6Q-SD

sergeyprilepin — Wed, 15 Jan 2014 02:53:43 GMT

Hi Yuri,

can You give the layout file of MCIMX6Q-SD in ORCAD v. 16.2 format?
We looking for making device based on i.MX6 processor, and I need to have a reference design.

Thanks at any case.

Re: Shematics on MCIMX6Q-SD

Yuri — Wed, 15 Jan 2014 06:03:57 GMT

Perhaps the following helps (layout file in text format)

https://community.freescale.com/message/317524#317524

Re: Shematics on MCIMX6Q-SD

sreekn — Sun, 26 Jan 2014 16:29:30 GMT

Hi,

I am trying to open the reference design, "SCH-27417_C3.DSN" for i.MX6 Dual lite in OrCAD 9.1, however it returns "an unsupported file format" error. Any hope to get the file compatible for OrCAD 9.1 version ? Thanks in advance.

Re: Shematics on MCIMX6Q-SD

sergeyprilepin — Wed, 19 Feb 2014 03:32:28 GMT

Hi, Yuri,

I have a sily question about SABRE schematic: there are a lot of solder shorts and resistors with zero resistance.

Шы ше result of ALLEGRO back annotation from PCB Editor to Schematic Editor?

Thanks at any case!

Re: Shematics on MCIMX6Q-SD

Yuri — Fri, 21 Feb 2014 05:01:41 GMT

I am not a member of the SABRE design team, but - my opinion - solder shorts and resistors with zero resistance are not result
of back annotation. Usually they are inserted in schematic design stage as test / measurements points.