topic Re: i.MX8QXP memtester failed to run problem in i.MX Processors

i.MX8QXP memtester failed to run problem

zhengguang_yang — Wed, 08 Dec 2021 06:21:55 GMT

We are using imx8qxp, Yocto3.0.

Kernel Version:5.4.70

We found that on the imx8qxp yocto 3.0 system, if the parameters behind the memtester are greater than 50% of the DDR free space, the system will kill the memtester because of insufficient memory.

As shown in the figure above, the available space is 1.2G. Execute the command memtester 700M, the system will report the following error, and then kill memtester.

We found that Yocto 3.0 system on i.MX8MM platform does not have this problem, and Yocto 2.5 system on i.MX8QXP platform does not have this problem.

Only Yocto 3.0 system on i.MX8QXP platform has this problem.

Re: i.MX8QXP memtester failed to run problem

Rita_Wang — Fri, 31 Dec 2021 08:14:15 GMT

Are you using the NXP i.MX8QXP EVK board?

Re: i.MX8QXP memtester failed to run problem

josephzhou1 — Wed, 12 Jan 2022 03:09:12 GMT

hi , all

i.MX8QXP EVK? i tok it is i.MX8QXP MEK???

i saw his board is i.MX8X RTX 2.1

is not supported . then you must port in your board.

We found that Yocto 3.0 system on i.MX8MM platform does not have this problem, so imx8MQ also ok but i saw " memtester not tainted" , try Bitbake by yours self?

as mentioned , we suggest that you use Yocto BSP 3.1 which is a Long Term Support version itself

thank you , Solved.

Dunfell

3.1

April 2020

3.1.13 (Dec. 2021)

Long Term Support (until Apr. 2024)

Re: i.MX8QXP memtester failed to run problem

Rita_Wang — Tue, 04 Jan 2022 04:22:16 GMT

You can see the Yocto release version align with the code https://wiki.yoctoproject.org/wiki/Releases.

How about the 3.1version using?

Re: i.MX8QXP memtester failed to run problem

charleshuang — Wed, 12 Jan 2022 00:51:19 GMT

Hi @Rita_Wang and NXP teams,

We found that the Imx8mq evk board also has the problem on the 5.4.70 Yocto 3.0 demo image.

The 4.14.98 Yocto 2.5 and 5.10.9 Yocto 3.2 demo images on the Imx8mq evk board does not have this problem.

Could you please help to verify the 5.4.70 Yocto 3.0 BSP? Thanks.

Re: i.MX8QXP memtester failed to run problem

josephzhou1 — Wed, 12 Jan 2022 03:14:32 GMT

as mentioned , we suggest that you use Yocto BSP 3.1 which is a Long Term Support version itself