topic Re: imx8mq: Android11 load M4 crashed in i.MX Processors

imx8mq: Android11 load M4 crashed

edward_fu — Wed, 01 Dec 2021 01:51:13 GMT

Hi experts,

I am using imx8mq board to develop rpmsg in my project. I am running Android 11.0.0_2.0.0. I flashed the M4 image along with Android images with "uuu_imx_android_flash.sh" script. And in uboot I set bootcmd as below:

setenv bootcmd "bootmcu && boota mmc0"

At first, M4 run normally as expected, But after few seconds, M4 program crashed and Android run normally.

What's the problem maybe?

Thanks

Edward

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Wed, 01 Dec 2021 08:08:37 GMT

Can you share your logs?

Re: imx8mq: Android11 load M4 crashed

edward_fu — Fri, 03 Dec 2021 07:32:02 GMT

Thanks, it solved by using UART4 not UART2.

But till one problem happened, I run the rpmsg_lite_str_echo_rtos demo. Rpmsg channel has been created in Android(/dev/ttyRPMSG30 exists), and A53 sent "hello world!" to M4 successfully, but M4 cannot receive anything.

Log in Android:

[ 0.000000] OF: reserved mem: initialized node rpmsg_dma@0xb8400000, compatible id shared-dma-pool
[ 0.313304] imx rpmsg driver is registered.
[ 2.441396] imx_rpmsg_probe
[ 2.444346] imx-rpmsg b8000000.rpmsg: assigned reserved memory node rpmsg_dma@0xb8400000
[ 2.452982] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 2.453012] virtio_rpmsg_bus virtio0: creating channel rpmsg-virtual-tty-channel-1 addr 0x1e
[ 6.406768] rpmsg_tty_probe
[ 6.409589] imx_rpmsg_tty virtio0.rpmsg-virtual-tty-channel-1.-1.30: new channel: 0x400 -> 0x1e!
[ 6.418781] Install rpmsg tty driver!
[ 6.422542] rpmsg_send hello world! success.

And log in M4:

RPMSG String Echo FreeRTOS RTOS API Demo...

Nameservice sent, ready for incoming messages...

I'd like to know why M4 cannot receive A53 message even rpmsg channel created between A53 and M4?

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Mon, 06 Dec 2021 02:04:02 GMT

I tested on Linux before, there is no issue. I will test on Android asap!

Re: imx8mq: Android11 load M4 crashed

edward_fu — Mon, 06 Dec 2021 02:08:43 GMT

Thanks.

I also tested it on linux and it worked well. But it doesnot work on Android.

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Mon, 06 Dec 2021 05:48:22 GMT

I have tested our mcu demo image on Android.M core can accept audio from DirectAudioPlayer.

#################### LOW POWER AUDIO TASK #################### Build Time: Jul 30 2021--08:48:03 ******************************** Wait the Linux kernel boot up to create the link between M core and A core. ******************************** The rpmsg channel between M core and A core created! ******************************** Task A is working now. No audio playback, M core enters STOP mode! Playback is running, M core enters RUN mode!

Re: imx8mq: Android11 load M4 crashed

edward_fu — Mon, 06 Dec 2021 05:56:27 GMT

Thanks for your quick reply.

I'd like to know which board did you use. And could you share you dts and which android version or linux kernel version did you use?

Could you test the rpmsg_lite_str_echo_rtos demo?

Re: imx8mq: Android11 load M4 crashed

edward_fu — Wed, 22 Dec 2021 02:49:53 GMT

Do you have any updates?

Why do you always respond me a little not finish the question?

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Wed, 22 Dec 2021 04:02:56 GMT

Can you share your changes in Android source code? The Android11_2.0.0 demo images can't support M4

Re: imx8mq: Android11 load M4 crashed

edward_fu — Wed, 22 Dec 2021 05:53:06 GMT

Firstly, I modified serveral files as below:

1. add below contents in imx8m/evk_8mq/SharedBoardConfig.mk

BOARD_VENDOR_KERNEL_MODULES += \
$(KERNEL_OUT)/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_i2c.ko \
$(KERNEL_OUT)/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_i2c.ko

2. add below contents in imx8m/evk_8mq/BoardConfig.mk

TARGET_BOARD_DTS_CONFIG += imx8mq-rpmsg:imx8mq-evk-rpmsg.dtbq

3. modify arch/arm64/boot/dts/freescale/imx8mq-evk-rpmsg.dtsvdev-nums = <1>;
reg = <0x0 0xb8000000 0x0 0x10000>;
- memory-region = <&vdevbuffer>;
- status = "disabled";
+ memory-region = <&rpmsg_dma_reserved>;
+ status = "okay";

Secondly, compiple the image and flash to your board use below command in ubuntu

./uuu_imx_android_flash.sh -f imx8mq -e -m

remember to name the dtbo-imx8mq-rpmsg.img to dtbo-imx8mq-rpmsg.img

and the m4 bin named as imx8mq_mcu_demo.img when flash image to your board

Thirdly, enter uboot and modify bootcmd as:

setenv bootcmd "bootmcu && boota mmc0"

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Thu, 23 Dec 2021 02:27:21 GMT

Can you share your imx8mq-evk-rpmsg.dts?

I found that my dts file is different from your dts

Re: imx8mq: Android11 load M4 crashed

edward_fu — Thu, 23 Dec 2021 02:38:36 GMT

Sure, it is like below which I reference https://www.spinics.net/lists/arm-kernel/msg739501.html :

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2019 NXP
*/

/dts-v1/;

#include "imx8mq-evk.dts"

/ {
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;

m4_reserved: m4@0x80000000 {
no-map;
reg = <0 0x80000000 0 0x1000000>;
};

rpmsg_reserved: rpmsg@0xb8000000 {
no-map;
reg = <0 0xb8000000 0 0x400000>;
};

rpmsg_dma_reserved:rpmsg_dma@0xb8400000 {
compatible = "shared-dma-pool";
no-map;
reg = <0 0xb8400000 0 0x100000>;
};
};
};

/*
* Regarding to the HW conflications, the following module should be disabled
* when M4 is running on evk board.
* gpt1, i2c2, pwm4, tmu, uart2
*/

&i2c2 {
status = "disabled";
};

&pwm4 {
status = "disabled";
};

&rpmsg{
/*
* 64K for one rpmsg instance:
* --0xb8000000~0xb800ffff: pingpong
*/
vdev-nums = <1>;
reg = <0x0 0xb8000000 0x0 0x10000>;
memory-region = <&rpmsg_dma_reserved>;
status = "okay";
};

&tmu {
status = "disabled";
};

&uart2 {
status = "disabled";
};

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Mon, 27 Dec 2021 03:34:37 GMT

The rpmsg dts file in 5.10.x is not using node &rpmsg, you can try to remove it.As we have reserved the M4 memory.The official imx8mq-evk-rpmsg.dts have supported M4 demo program.

reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		m4_reserved: m4@0x80000000 {
			no-map;
			reg = <0 0x80000000 0 0x1000000>;
		};

		vdev0vring0: vdev0vring0@b8000000 {
			reg = <0 0xb8000000 0 0x8000>;
			no-map;
		};

		vdev0vring1: vdev0vring1@b8008000 {
			reg = <0 0xb8008000 0 0x8000>;
			no-map;
		};

		rsc_table: rsc_table@b80ff000 {
			reg = <0 0xb80ff000 0 0x1000>;
			no-map;
		};

		vdevbuffer: vdevbuffer@b8400000 {
			compatible = "shared-dma-pool";
			reg = <0 0xb8400000 0 0x100000>;
			no-map;
		};
	};

	imx8mq-cm4 {
		compatible = "fsl,imx8mq-cm4";
		rsc-da = <0xb8000000>;
		clocks = <&clk IMX8MQ_CLK_M4_DIV>;
		mbox-names = "tx", "rx", "rxdb";
		mboxes = <&mu 0 1
			  &mu 1 1
			  &mu 3 1>;
		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
		syscon = <&src>;
	};

Re: imx8mq: Android11 load M4 crashed

edward_fu — Mon, 27 Dec 2021 05:17:01 GMT

Thanks.

Have you tried it and does it work in Android?

Re: imx8mq: Android11 load M4 crashed

edward_fu — Mon, 27 Dec 2021 07:27:16 GMT

I tried as you said. But it did not work. /dev/ttyRPMSG* did not apper, how to communicate with M4. Could you run the demo in your side? Thanks.

Re: imx8mq: Android11 load M4 crashed

Zhiming_Liu — Thu, 06 Jan 2022 06:01:37 GMT

A-core will disable UART2_CLK_ROOT, which is used for M-core debug uart. So M-core will block when running PRINTF().

One can add “ setenv append_bootargs clk_ignore_unused“ in uboot if not paying attention to power consumption

Re: imx8mq: Android11 load M4 crashed

edward_fu — Fri, 07 Jan 2022 00:55:03 GMT

Thanks,

I have solved the rpmsg problem.

What you said is about solveing M4 crashing when using UART2? You mean uart2 clock is enabled by A-core not by M-core. I donot agree with you, if as you said, why M4 can run with UART2 printing alone without runging A-core.

Re: imx8mq: Android11 load M4 crashed

penny_lin — Thu, 14 Apr 2022 08:07:55 GMT

Hi Sirs:

I follow this community to enable RPMSG function on Android 11_2.2.0 BSP,

but there are booting issue, the dispaly is not enter Adroid UI, it only show "Android animation" logo on the HDMI

. Do you have the same issue ? If yes, Could you let me know how to solved it? Thank a lot.

Re: imx8mq: Android11 load M4 crashed

edward_fu — Fri, 15 Apr 2022 00:15:54 GMT

Hi penny,

No, I haven't this problem. I propose you double checking the dts again if any hardware resource has conflict.

Re: imx8mq: Android11 load M4 crashed

penny_lin — Thu, 21 Apr 2022 01:40:25 GMT

Thank your help. the issue solved.