topic Issue booting DOM0 kernel with Xen Hypervisor on imx8m in i.MX Processors

Issue booting DOM0 kernel with Xen Hypervisor on imx8m

Harish-Sam — Fri, 17 Dec 2021 06:41:27 GMT

Dear Support,

I am using IMX8QM Development board which is designed by Iwave System.

I have successfully built xen Image,Kernel Image,Rootfs and successfully boot up xen.

but during booting DOM0 kernel, processor getting stuck.

Please find attached log and please let me know solution for same.

Thanks and Regards,

Harishchandra Samgir

Re: Issue booting DOM0 kernel with Xen Hypervisor on imx8m

Bio_TICFSL — Fri, 17 Dec 2021 14:46:37 GMT

Hello TCS,

You are not creating the dom0 in the compiling time, please download the yocto project user guide, there is come with the instruction to generated dom0.

https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX

Regards