i.MX Processors中的主题 i.MX 8M Plus Configure Settle Parameters

i.MX 8M Plus Configure Settle Parameters

sachin_patel — Mon, 29 Nov 2021 16:42:42 GMT

Hi,

I am currently integrating a MIPI CSI-2 solution into our custom hardware. I'm aware of the table in this post https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764265 for the HS_SETTLE and CLK_SETTLE parameters, but am unsure if the same is true for i.MX 8M Plus.

Thanks,

Sachin Patel

Re: i.MX 8M Plus Configure Settle Parameters

igorpadykov — Mon, 29 Nov 2021 23:59:11 GMT

Hi Sachin

file was sent via mail.

Best regards
igor

Re: i.MX 8M Plus Configure Settle Parameters

jeremie1 — Thu, 21 Apr 2022 17:05:26 GMT

Hello @igorpadykov ,

we are in the same process here , porting an Ar1335 OnSemi on the I.mx8m Plus.

we have en NDA with nxp and are part of the beta program for the 8mp ,

could we get the same file ? And if any , some files and doc relative to this port ?

my email is visible for you in my account i guess , if not , let me know.

best regard,

Jeremie bours

Re: i.MX 8M Plus Configure Settle Parameters

sachin_patel — Thu, 21 Apr 2022 17:18:40 GMT

Hi Jeremy, as NXP support is usually slow to respond, I thought I might as well at least help.

The table in the post I linked for the imx7 board has the same timing parameters, so if for example you want 1000 Mbps/lane, you choose HSSETTLE as 22.

Re: i.MX 8M Plus Configure Settle Parameters

sachin_patel — Thu, 21 Apr 2022 17:29:12 GMT

Hi Jeremie, as NXP support is usually slow to respond, I thought I might as well at least help.

The table in the post I linked for the imx7 board has the same timing parameters, so if for example you want 1000 Mbps/lane, you choose HSSETTLE as 22.

Re: i.MX 8M Plus Configure Settle Parameters

jeremie1 — Tue, 26 Apr 2022 12:18:01 GMT

A great thank you Sachin !

We used the table accordingly,

we are still stuck with uggly scrambled pixels, but that is the necessary pain when dealing with new camera

400 x 480 RAW10 pixels , recorded in RGBP ( RGB565 ) by the I.MX8M plus :

image (24).png

The pixels seems not well aligned , if you had this kind of behaviour before, do not hesitate !
Best regard, and thank you again,

Jérémie

Re: i.MX 8M Plus Configure Settle Parameters

pgugiclr — Wed, 17 Jan 2024 20:42:46 GMT

Hi,

So where can I get those values for iMX8M Plus?

Are they the same as the table above?

Thank you