topic eMMC programming with JTAG interface - iMX 6SX in i.MX Processors

eMMC programming with JTAG interface - iMX 6SX

kanimozhi_t — Mon, 16 May 2022 14:41:06 GMT

Hi,

We're planning to use i.MX 6SX Sabre board for our development and interested in knowing the procedure to flash eMMC (with Linux .sdimg) using JLINK debugger.

From SEGGER forum, we came to know that we need the "custom RAM code" (flash driver) for each board.

What is the procedure to flash/program eMMC on i.MX 6SX with JTAG?
Does NXP Provide the J-Link flash driver for i.MX 6SX?

Thanks in advance.

Re: eMMC programming with JTAG interface - iMX 6SX

joanxie — Wed, 24 Nov 2021 09:38:25 GMT

pls refer to the document as below:

"https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/Bring-up-i-MX6-via-JTAG/ta-p/1124954"

Re: eMMC programming with JTAG interface - iMX 6SX

kanimozhi_t — Mon, 16 May 2022 15:03:37 GMT

Thanks @joanxie for your support! We're using SEGGER J-Link. Do you have steps specific for this?

Re: eMMC programming with JTAG interface - iMX 6SX

Alex_Smart — Wed, 09 Oct 2024 12:39:58 GMT

any updates on this?