i.MX7ULP SAI Channels Using

ATAineri — Sun, 24 Oct 2021 11:01:47 GMT

Good afternoon, dear NXP! I Can't understand from datasheet:

For example, SAI0 has 2 RX and 2 TX channels. I'm going to develop dual mono Digital Audio Player. It means that there is 2 DAC microchips: 1 for L and 1 for R.

I can't understand from Linux Kernel Module - is this 2 channels is L and R reletivetely or it is something another and I have to use TX0 for both channels and SYNC lane is signalize - what channel DAC have to read?

Now - I can't understand how to realize dual mono DAP using i.MX7ULP SAI

Is there some drivers that I can read to understand how it works or I should write my own driver to provide such functionality?

Re: i.MX7ULP SAI Channels Using

igorpadykov — Sun, 24 Oct 2021 23:41:45 GMT

Hi Vladislav

> is this 2 channels is L and R reletivetely or it is something another and I

>have to use TX0 for both channels and SYNC lane is signalize - what channel DAC have to read?

2 channels are not for L and R , one TX0 can be used for L and R, for usage one can look

at wm8960 example in i.MX7ULP EVK schematic (p.9 SPF-29164) MCIMX7ULP-EVK Design Files

Driver description can be found in i.MX Linux Reference Manual

Best regards
igor

topic Re: i.MX7ULP SAI Channels Using in i.MX Processors

i.MX7ULP SAI Channels Using

Re: i.MX7ULP SAI Channels Using