topic Re: how to patch my kernel with yocto? in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233816#M18173 <HTML><HEAD></HEAD><BODY><P>You can take a look how we do in meta-fsl-arm-extra. It is essentially the same thing you're doing.</P></BODY></HTML> Fri, 21 Jun 2013 21:57:27 GMT OtavioSalvador 2013-06-21T21:57:27Z how to patch my kernel with yocto? https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233813#M18170 <HTML><HEAD></HEAD><BODY><P>I have some kernel and uboot patches for an imx53 board from another vendor. They have instructions based on LTIB, but I want to try with a yocto based environment. </P><P>I was tried to follow some documentation from yocto, but some of it is not applicable. </P><P>Can someone point me to some documentation or maybe help get me started? I'm not sure if I need to create a machine or layer, or how/where to make my own branch with repo. </P></BODY></HTML> Fri, 21 Jun 2013 18:40:02 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233813#M18170 travisladuke 2013-06-21T18:40:02Z Re: how to patch my kernel with yocto? https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233814#M18171 <HTML><HEAD></HEAD><BODY><P>I strongly advice you to start a layer for your project; it makes your maintenance and development work much easier.</P><P></P><P>You then can include a board setting and use bbappend files to make the need changes on recipes.</P><P></P><P>This is how we do when customizing layers for our customers.</P><P></P><P>Regards,</P></BODY></HTML> Fri, 21 Jun 2013 18:49:45 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233814#M18171 OtavioSalvador 2013-06-21T18:49:45Z Re: how to patch my kernel with yocto? https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233815#M18172 <HTML><HEAD></HEAD><BODY><P>Thanks. I made a new layer and it built. </P><P>I'm not sure where to put my patches now. The only manuals I can find involve using yocto-kernel which isn't applicable here. </P></BODY></HTML> Fri, 21 Jun 2013 21:44:09 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233815#M18172 travisladuke 2013-06-21T21:44:09Z Re: how to patch my kernel with yocto? https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233816#M18173 <HTML><HEAD></HEAD><BODY><P>You can take a look how we do in meta-fsl-arm-extra. It is essentially the same thing you're doing.</P></BODY></HTML> Fri, 21 Jun 2013 21:57:27 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-patch-my-kernel-with-yocto/m-p/233816#M18173 OtavioSalvador 2013-06-21T21:57:27Z