https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1328984#M179030 <P>Good news it works.</P> Wed, 25 Aug 2021 01:46:52 GMT Rita_Wang 2021-08-25T01:46:52Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1326812#M178814 <P>Hi all,</P><P>I flashed my i.MX8 Mini with the Linux image (L5.4.70_2.3.0_images_MX8MMEVK.zip) I downloaded from the official website and it worked well.</P><P>And then I tried to switch back to android image (android_p9.0.0_1.0.0-ga_image_8mmevk) also downloaded from the official website. But uuu is always blocked and keep repeating the "write -f u-boot-imx8mm-evk-uuu.imx -offset 0x57c00" step.</P><P>Since it does not work, I switched it back to Linux image again with the same image above. Though I can successfully flash the image, the board does not boot and looks like it is keeping reset again and again (The green D1 cpu and red D708 power LED goes off for a short instant every a few second).</P><P>Hopefully I could find some help here. Thank you.</P> Fri, 20 Aug 2021 08:42:47 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1326812#M178814 littlebone 2021-08-20T08:42:47Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327514#M178886 <P>Have you set the right boot mode for your board to boot up? For linux and android download and boot up you can see our user guide, details in our documents.</P> <P>&nbsp;</P> Mon, 23 Aug 2021 07:21:57 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327514#M178886 Rita_Wang 2021-08-23T07:21:57Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327910#M178922 <P>Hi b45499,</P><P>Correct me if I am wrong, as I know the switch setting is the same for Android/Linux BSP before flashing/after flashed. That is, set to SDP mode before flashing and switch set to boot from eMMC mode after flashed. Thank you.</P> Mon, 23 Aug 2021 16:17:49 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327910#M178922 littlebone 2021-08-23T16:17:49Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327915#M178923 <P>BTW I am flashing the image with the instructions I found on NXP website (<SPAN>uuu.exe L4.14.78_1.0.0_ga_images_MX8MMEVK.zip and&nbsp;uuu.exe uuu-android-mx8mm-evk-sd.lst</SPAN>)</P> Mon, 23 Aug 2021 16:24:48 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1327915#M178923 littlebone 2021-08-23T16:24:48Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1328790#M179008 <P>Confirmed that the problem was caused by one wrong on/off setting on the switch. Thank you.&nbsp;</P> Tue, 24 Aug 2021 15:59:20 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1328790#M179008 littlebone 2021-08-24T15:59:20Z https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1328984#M179030 <P>Good news it works.</P> Wed, 25 Aug 2021 01:46:52 GMT https://community.nxp.com/t5/i-MX-Processors/i-MX-8-Mini-cannot-boot-from-Linux-and-not-able-to-switch-to/m-p/1328984#M179030 Rita_Wang 2021-08-25T01:46:52Z