How to use Parallel CSI( 16 bit camera ) interface on IMX6Q

sun_hua — Sat, 07 Aug 2021 06:40:19 GMT

Hello all.

I’m trying to interface IMX6Q with a 16 bit camera module which directly gives YUV422 format output with HSYNC , VSYNC and PIXCLK (data mode protocol: gated mode).

I have tried to modification IPUx_CSI0_SENS_CONF reg （CSI0_DATA_WIDTH、CSI0_SENS_DATA_FORMAT、CSI0_PACK_TIGHT）but not work（base on ov5640 code）.

So what shall i do, please give me some guidance.

Thanks.

Re: How to use Parallel CSI( 16 bit camera ) interface on IMX6Q

joanxie — Wed, 11 Aug 2021 02:55:01 GMT

for imx6q sabresd board, which use ov5642 as parallel camera, so you can refer to that, I don't know what bsp version you use, you can refer to your bsp version document, named i.MX_Porting_Guide.pdf, which has detailed information about how to enable the new parallel camera

i.MX Processors中的主题 How to use Parallel CSI( 16 bit camera ) interface on IMX6Q

How to use Parallel CSI( 16 bit camera ) interface on IMX6Q

Re: How to use Parallel CSI( 16 bit camera ) interface on IMX6Q