i.MX Processors中的主题 Re: IMX8M-Plus Hantro 4K Encoder

IMX8M-Plus Hantro 4K Encoder

jgsandom — Wed, 26 May 2021 21:02:24 GMT

Hi all,

From looking at the IMX8M-Plus documentation, it's stated that the VPU encoder supports up to 1080p60. It seems as though the Hantro VC8000E encoder is being used, which states support for 4K encoding.

Does anyone know why the IMX8M-Plus doesn't support 4K encoding? or does the hardware support it but not the software yet? is it planned for a future release?

Any clarification would be helpful!

Thank you.

@joanxie

Re: IMX8M-Plus Hantro 4K Encoder

joanxie — Thu, 27 May 2021 03:11:39 GMT

refer to the release note of yocto bsp, vpu can support only 1080p@60 for imx8mp, and I tested on the imx8mp too, couldn't encoding 4K video

Re: IMX8M-Plus Hantro 4K Encoder

jgsandom — Thu, 27 May 2021 05:33:55 GMT

Hi @joanxie,

Thanks for the response.

I'm aware of this and I have 1080p encoding working fine. My question is why doesn't the IMX8M-Plus support 4k encoding when the actual Hantro VC8000E encoder supports it?

Seems that the hardware is capable at least. Any ideas?

Re: IMX8M-Plus Hantro 4K Encoder

joanxie — Thu, 27 May 2021 06:25:40 GMT

should be the HW limitation since you use VPU as encoder

Re: IMX8M-Plus Hantro 4K Encoder

jgsandom — Thu, 27 May 2021 08:35:06 GMT

Can you please clarify on your response?

Yes, the VPU is being used as an encoder and the encoder is Hantro VC8000E, correct? this has capabilities of 4K, yet the IMX8M-Plus can do up to 1080p. Why is it that the IMX8M-Plus is unable to utilise the full capabilities of the Hantro encoder? Can you clarify what the limitation is?

Re: IMX8M-Plus Hantro 4K Encoder

joanxie — Thu, 03 Jun 2021 05:45:48 GMT

information from expert team that this is software control limitation and they don't suggest customer to use 4k, even they can use this, the performance is very bad

Re: IMX8M-Plus Hantro 4K Encoder

jgsandom — Fri, 04 Jun 2021 21:35:38 GMT

Thanks @joanxie . Is it possible to provide the patch from the expert team, so I can try it out and assess the performance?

Re: IMX8M-Plus Hantro 4K Encoder

joanxie — Mon, 07 Jun 2021 02:42:32 GMT

sorry, don't have such patch, just on theory

Re: IMX8M-Plus Hantro 4K Encoder

artsiomstaliaro — Sun, 20 Feb 2022 06:25:55 GMT

Dear @joanxie ,

this limitation is VPU firmware or I can try to remove the limitation in the GStreamer plugin and I should be able to encode 4K? Right?

Re: IMX8M-Plus Hantro 4K Encoder

David_Marty — Thu, 27 Feb 2025 15:04:44 GMT

Dear @jgsandom,

Do you find a solution to remove the sotware limitation ?

Re: IMX8M-Plus Hantro 4K Encoder

artsiomstaliaro — Thu, 27 Feb 2025 15:09:11 GMT

yes, using now IMX95 in our product:

https://dab-embedded.com/product/aquaedge-edge-video-processing-platform/